-
Content Count
78 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by Kazi
-
Hi all, I've notice in the past few days that my wipers seem to be getting stuck on my aerial causing them to stop working. They seem to be over extending and sitting on the scuttle pannel and the occasionally (although getting more regular) getting stuck on my aerial. Any ideas on what it could be or has this happened to anyone before?
-
I'm from Inverness as well. There is quite a few kicking around. There are 6 glanza's and 2 GTs around that I know of now. Silver one is my current one and the white one is my old car which is still around Inverness.
-
I had the same timer in my last glanza and the HKS loom fitted and worked perfect.
-
£215 and that includes new pad carriers as well. About £50 cheaper than ID workz
-
bought a rebuild kit to do the old one up when I’ve got time and bought a new one from Toyota. Surprised how cheap it was tbh
-
Where can I get an OSR caliper asap that isn't going to cost me an absolute fortune? Or Is anyone breaking a glanza around Inverness area??
-
Glanza front / rear discs and pads question; Do Uk spec 1.3 NA have the same front/rear discs & pads as glanza V? Or does anyone have part numbers (IE Pagid) for some? For standard car so no need for uprated stuffs Been a good few years since owning one of these things and memory is fuzzy but i see to remember that Paseo fronts are the same. Really needing to get all of the changed soon. TIA
-
Think I’ll order both and do it over Xmas while I have time off
-
No noises on full lock, only when you are traveling straight doing 60-70 mph. Lane changes for example doesn’t make it any more or less notable. I know from experience that the checks on wheels bearings aren’t always conclusive but if it was a bearing wouldn’t it make a constant sound and the increase / decrease in accordance with the speed you are doing?
-
From research I would say they are. Ill have a look at them also. TD are listing a 23/30 & 23/23 What is this numbering for? Is it to do with tooth gearing for the ABS? If so what would be the size for a 97 model?
-
past day or so i've been getting what can only be described as a howling noise coming from my drivers front wheel and I'm putting this down to the outer CV joint. There is no movement in the wheel when its jacked up so its not a bearing (I don't think anyway), Question is where are folks getting CV joints for a glanza with ABS from or does anyone have a Part number for one that i can take to the local motor factors as i get a really good rate on parts. TIA Kazi
-
That’s why young kids shouldn’t have nice cars skinny! Fucked a good one so he did! google search shows its Laguna indeed. Must have been a facelift version. My last one was split down the middle as well.
-
yeh mind that one. was talking to him about it. was a lovely looking motor for not very much! Thanks dude. I'm not 100% sure what it is. I had a Laguna one on my paseo a few years ago and it does look similar but this one fits the glanza bumper really well. will need to get under the car and see how its fitted.
-
Was that the red one he had?
-
Nut lol looked at a few but they were absolutely hanging and prices are all over the shop. I’ll wait until I get more workshop space and get myself a project one. Either that or sell the 86 and get one but tbh, when I got my first Glanza after my last GT4 I preferred the Glanza more. Either way I’m currently happy lol
-
Thought I'd drop in and say hi... again! Picked myself up another Glanza literally 3 years to the day I sold my last one. Really didn't want to sell my last one but bought myself an AE86 and at the time couldn't own both! had the itch for one ever since and this one came up and couldn't turn it down! fairly sedate compared to my last one being that its 95% standard. have coilovers, cat back and air filter. rest is still standard (still has the cat), hi/low boost button still works, 5 peace floor mats etc. car still reads in KMs and nice to get an example where someone hasn't reall
-
Silver glanza in Beauly and kilcoy (same car)
Kazi replied to wee_shep's topic in I Spy, Have You Been Spotted?
Yo! That would be me! I start work in Beauly 2 days a week and the rest at Redcastle station near Kilcoy so will see it there a few times! I stay in Conon so will see it kicking around. glad you liked the sound -
long shot but I'm after some TOMs racing vestas. any colour, condition and PDC although closer to 4x114.4 would be ideal.
-
Hi guys. I'm wondering how hard it is to do a Auto manual conversion. My girlfriend might be picking up a Toyota Cynos which is a JDM version of the paseo with the 5efe and has an auto box fitted. she has a manual paseo so have everything needed. any info would be great. cheers
-
Will try uprated discs and pads before callipers. And good choices for discs?
-
Ahh. Haven't come across a 185 with single pots. So is it the 185 single pots most people go for then? What's the fitting like on them?
-
From years with celicas I'm sure they are twin pot. Lol
-
Which Celica set up we talking? The twin pots from the ss3/GT or the 4 pots from the gt4? Luckily I have both. I'm guessing the 2 pots as the 4 would be a pain in the arse for wheel fitment. The 2 pots a straight fit or any fabrication needed?
-
all the levels are good with no leaks. will get some new stoppers ordered over winter and get them on. thought it would be something simple like that. cheers