SG_EP91

Welcome lad, Sweet car too

Great post and must say ive used SRP alot and i found the longer i left it on the car the better the result was, i mean i left it on at least 1-2 hours once and it was amazing, seemed to help it settle into the swirls better BUT do not use it in the evening when temp changes (IMO) as gets colder and doesnt work as good (Just my opinion )

^^ cheers few tricks t try then lol

^^ cheers shahzad will try that

As title states whe i push on my accelerator you can feel it kind of stick after a quarter of the way down, not that you have to shove it or put pressure on it to push it but just feels a wee bit sticky if anyone gets my drift? Can be noticed when car in neutral and go t push accelerator and just feel a slight stick! Anyone know if there anything i could try make it smooth or anything?

Cheers for the offer Morgey but live in Ireland so bit far lol, but cheers for the offer man appreciate it.. Might be getting one tomorrow so fingers crossed

Yeah as ^^ WeeJohn said and what i searched so far am nearly sure 98&99 spec EP91 N/a's are the same part but when i searched a Toyota Dealers site the part number for 96/97 calliper looks way different and completley different part number so am asuming they done slight upgrade mabye for the 98/99 specs??? Any help/advice opinions greatly appricated lads cheers

As the title states looking for advice ASAP as going to get a 2nd hand front drivers side calliper and wondering if the 98&99 spec EP91 N/A Starlet use the same brake calliper? I know the 96&97 are different! So advice or help on will a 99 spec calliper fit on my 98?

Yeah their common issues but only if they've been driven by maniacs that are rough with them, hence why its hard to find a decent one. I had a 98 EK4 1.6 vtech dohc and loved it but had to go cause couldnt afford it Aw man i understand i would pick a push bike over an EP2, Hated them when they first came out and always will. EK shapes are the nicest and always more reliable (imo) But would still pick my starlet over an EP2, sorry for the confusion lol

Welcome lad. Id personally go with CIVIC cause ive had 2 already and didnt get one bit of bother ever with them. Found parts and mod parts very easy but it depends on cashflow too. Changed to a 1.3 N/A starlet and it was a good buy for tax and insurance purposes although ive had bad luck with it from Brake Callipers, handbrake cable snapping and heater matrix failing, and not as comfy as other cars but still a resonable car.. Anyway choice is your goodluck man

Alls good guys got it sorted. Thanks anyway

Just after putting in my new heater matrix(such a cunt of a job by the way), and ive got all the internal connections done right but not sure on the two pipes on the heater matrix that come through to the engine and which one feeds to where?? If anyone knows please let me know asap please

Welcome lad, This a really good site and easy to navigate around if you spend the time on it.. From Ireland myself too.. Enjoy the browsing here, great stuff, tips and ideas

ha good luck if it's the heater matrix cause i spent a good 3-4 hours taking the dash and everything around there out and in(Ive never done this before on any car) and i swear to god i will not ever be doing it again..It's still a bloody torture trying to get the heater matrix out when the dash is out sohonestly good luck to anyone seriously!!!!!!!!!!!

Was f00king awuful!! Such a balls of the commentry when doing the star in a car part lol.. Complete waste of the 10mins of my life i watched it for.. NEVER EVER AGAIN lol!!

bumpppppppppppp

anyone????????????????

As the topic says guys i really need help with my HID's. The problem is that they worked perfect in my old car which took H4 size bulbs aswell as the Starlet and now they're playing up in the Starlet. Ok so there the low beam standard halagoen bulb but Full Beam HID but i have tried nearly every possible combination of the wires to get them to work but nothing happens.. So what happens is: 1. I have them connected right and everything. 2.I turn on the lights and they start flickering, but when i put on full beams HID's they work perfect, so took out the top connector where the wires connect

Thanks ryan33hks.. must get ordering

About that post you put up bout getting front clear corner lights from ep tune??? Where on there did you find them? I was looking and its mainly suspension etc...

How would that help? Unless your talking bout the tacky looking blue paint am going to fix that shortly

I done this myself only taking 30 mins at max if you fancy doing a part time job like ive done here's a link with pics: http://www.ukstarletclub.com/forums/index....showtopic=47420

Haha brilliant posts lol but havent really noticed too much noise only not very much sound proofing so sounds like your going 100mph at about 40/50 but a BIG BIG down i find with the car has to be the suspension.. NEEDS LOWERED big time.. Having owned a 1.6 Vtech CIVIC before having to drop in power you definatly miss a lowered car with strut brace's etc.. In saying all that think ill get new tyres and balanced 1st to see if thats the prob then work from there, But this site is awesome for info and feed back.. CHEERS TO EVERYONE WHO'S HERE TO HELP

Thanks Matt, Well tyres are good enough yet but going to be putting on a set of wet tyres as where i live its rain 24/7 possibly 360 days out of 365 its that bad lol.. A good dry warm day is like a holiday but thanks mate will defo get that done..

My steering is the same. I have standard alloys on my ep91 as bellow and driving long i get a vibration at 60mph+ and the steering feels very light at, times espically when i go over un-even parts on the road it feels like the car wobbles and if i hit small lumps of tar etc on the road. It almost feels the car could go anywhere to be honest. The tyres are good enough condition but have NOT got the car lowered yet so its sitting like a scared cat at the moment but really want to get this fixed as im doing alot of travelling with the car like this and need it sorted asap PLEASE!!! Also no click