Jump to content
TimD

EP82.racing

Recommended Posts

Great update, I really enjoyed reading all the nitty gritty on how you got everything built back up. Look forward to seeing more on this!


Share this post


Link to post
Share on other sites

ID workz do a 19 to 16mm 90degree hose


Edited by Ollieh17

Share this post


Link to post
Share on other sites

Is your coolant overflow bottle a stock GT bottle?


Also is your catch can vented somewhere?


Edited by maerijn

Share this post


Link to post
Share on other sites

Me and some mates are at Blyton on the 14th May if your ready in time Tim!

That'll likely be a little too early for me, I've a couple of weeks off the car now.

Is your coolant overflow bottle a stock GT bottle?

Also is your catch can vented somewhere?

It is, I separated it from the washer bottle and relocated it to the opposite side of the engine bay.

The catch can is vented underneath

Share this post


Link to post
Share on other sites

love this build so far where did you get the clamps for holding unit ? want to do this to mine :)


Share this post


Link to post
Share on other sites

Thanks.



A friend of mine had some laying around, but if you search for accusump brackets you should be able to find them quite easily.


Share this post


Link to post
Share on other sites

Thanks.

A friend of mine had some laying around, but if you search for accusump brackets you should be able to find them quite easily.

wat size roughly ? 4 and 1/4 inch ?

Share this post


Link to post
Share on other sites

7UP2hkCh.jpg

No more updates on the car, but the display I've been working tirelessly on is finally at a point where it bolts in.

Should hopefully get the chassis wiring finished very soon, then move onto the engine/ecu harness before having it mapped.

Share this post


Link to post
Share on other sites

great thread.

Are you running this car on the stock dizzy but with a DTA ECU?

Share this post


Link to post
Share on other sites

Thanks.

It'll be COP, the S80 can do sequential injection and ignition.

I 3D printed a bracket for my wideband gauge/controller the other day. Whilst my dash will display a wideband value from CAN, I didn't want to hide the controller away out of sight.

qAXECLx.jpg

I'll be back working on the car this weekend, can't wait!

Share this post


Link to post
Share on other sites

Hello 

 

Great process and attention to detail you have here

 

I need some help as im after an ep82 engine loom if you could possible help . Thankyou

Share this post


Link to post
Share on other sites

Some great Info here Tim thanks!

Share this post


Link to post
Share on other sites

Loads happening, but still not used it in anger for far too long. Few bits and pieces left to do before mapping and a shake down.

PD19f1D.png

GBC1C4r.png

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×