Jump to content

Recommended Posts

First time dealing with turbo Toyota setup , I've converted my ep70 to 5efte, when I start it it cuts out 3-4 time then it'll start and run at 700rpm sounds like it's running on 2 cylinders and won't rev properly, but as it warms up it revs normal, any ideas?

Next is it gets hot quite quickly, like after 4-5 mins running the heat off the manifold is severe , making me wonder is something up I've never known them to get this hot,

it's also boiling the water in the rad , it's blowing steam out the overflow , both rad pipes are hot , I've checked thermostat and it's opening and closing fine, any other things to try before I put it down to head gasket?

Any help appreciated as I'm new to turbo set ups only used to dealing with 1e& 2e's in starlets

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...