Muntasir Posted August 16, 2017 Share Posted August 16, 2017 bro, I read all the N/A E-Series Engine Discussions post about 4efe anf 5efe. but still confused what I need to change if I want to increase bhp of a 4efe engine as same as 5efe engine. If I buy 5efe engine head, block, piston and than use other things from my current 4efe engine it will increase my bhp? or i have to change other things? give me a complete suggestion please. If possible give me a list. Thanks for any help. Quote Link to post Share on other sites
lukEp Posted August 17, 2017 Share Posted August 17, 2017 Yes putting a 5e in will increase bhp even with the 4e ecu. Better way and to get around 120bhp would be 1nzfe with loom and ecu out of a tsport yaris. Out of the 3 engine mounts one is different... then custom zorst and some wiring. Quote Link to post Share on other sites
Muntasir Posted August 17, 2017 Author Share Posted August 17, 2017 thanks brother. anything i can do with a limited budget? Quote Link to post Share on other sites
5e colin Posted August 17, 2017 Share Posted August 17, 2017 its hardly going to be much faster fitting a 5e na as theres not much in it between 4efe/5efe its going to cost loads to have it right better of doing a budget turbo conversion Quote Link to post Share on other sites
Muntasir Posted August 17, 2017 Author Share Posted August 17, 2017 here in my country turbo conversion will cost me a lot. and i have another problem with my country low. I can't use 1.5 or higher engine in a car which is bought with a 1.3 engine. otherwise they will dump my car. But I don't satisfied with a 1.3(1300cc) engine and don't even can buy any 1.5(1500cc) or more higher powerful engine. 4efe and 5efe engine looks are same. So my plan is convert my current engine(4efe) to 5efe. by this way they can't notice that it's another engine and also I will got a more powerfull engine. now help me please. stuck in this bad situation. How i can complete this converting. what i have to change, what i have to take from a 5efe engine to make mine one more powerfull. I am a noob. disturbing you guys sorry for that Quote Link to post Share on other sites
5e colin Posted August 17, 2017 Share Posted August 17, 2017 just fit complete 5efe engine and be done heads are the same the block is 25mm longer so your rocker cover will be that much higher so bare 5e engine and bolt on aal your 4e stuf like manifold exhaust etc etc and drive away also the engine code is stamped in front of the block you will see it strait away Quote Link to post Share on other sites
Muntasir Posted August 17, 2017 Author Share Posted August 17, 2017 last question. what about ecu? Quote Link to post Share on other sites
5e colin Posted August 17, 2017 Share Posted August 17, 2017 (edited) Use 4efe ecu it will run the 5e unless you have 5e ecu might need few pin terminals swapping on ecu plugs both pinouts are online to check Unless the 5e ecu comes from serra or cynosB as there external coil setups and won't work with stock 4efe loom Edited August 17, 2017 by 5e colin Quote Link to post Share on other sites
Muntasir Posted August 18, 2017 Author Share Posted August 18, 2017 thanks bro. will update my project pic after completing. Thanks for you guys help Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.