glanza ep91 23 Posted August 18, 2017 Share Posted August 18, 2017 (edited) Hi i broke the 10mil bolt that hold on the dust plate and now im wondering can u run a manual without one thanks Edited August 18, 2017 by glanza ep91 23 Quote Link to post Share on other sites
glanza ep91 23 Posted August 18, 2017 Author Share Posted August 18, 2017 Basicaly i cant get the bolt out its spinning. So will i cut the dust plate along the lines or will i just run without it Quote Link to post Share on other sites
AdamB Posted August 18, 2017 Share Posted August 18, 2017 Try and get a very thin flatblade screwdriver under the head of the bolt, and lever it as you undo it with a ratchet. Quote Link to post Share on other sites
glanza ep91 23 Posted August 18, 2017 Author Share Posted August 18, 2017 Ya tried that ended up taking the head of the bolt off now im wondering will i cut the dust plate at the lines drawn or leave it off Quote Link to post Share on other sites
daniel_g Posted August 19, 2017 Share Posted August 19, 2017 Better off leaving the plate on. The bellhousing bolts hold it in well enough. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.