Muzza784 Posted October 31, 2017 Share Posted October 31, 2017 As above will the tegiwa harness bar fit a ep91 starlet/ glanza? Quote Link to post Share on other sites
Calum122 Posted November 4, 2017 Share Posted November 4, 2017 They say they do with a few shimes. Give them a ring and they will say exactly how they fiy. Quote Link to post Share on other sites
federalman Posted December 28, 2017 Share Posted December 28, 2017 I emailed them regarding any modifications and this was the response; Hi Matt, The universal Harness Bar is here:http://www.tegiwaimports.com/tegiwa-universal-harness-bar.html If it requires modification please see the owners club on how to do this. Bit piss poor if you ask me but I require a harness bar and they sell them. It seems some of the staff could do with some customer service training however. Quote Link to post Share on other sites
Ollieh17 Posted December 28, 2017 Share Posted December 28, 2017 What's wrong with That? It's a listed as universal harness bar. Not one for a starlet Quote Link to post Share on other sites
federalman Posted December 29, 2017 Share Posted December 29, 2017 It is indeed, however people on here had stated there were modifications required to it and to contact Tegiwa to find out what they were exactly. I however had limited success. Never mind, I have a MIG and TIG welder as well as a lathe so not really an issue. Would have been nice to have known what needed doing beforehand but there we go. When I have the thing I shall put up what mods need doing to it. Quote Link to post Share on other sites
Calum122 Posted December 29, 2017 Share Posted December 29, 2017 19 minutes ago, federalman said: It is indeed, however people on here had stated there were modifications required to it and to contact Tegiwa to find out what they were exactly. I however had limited success. Never mind, I have a MIG and TIG welder as well as a lathe so not really an issue. Would have been nice to have known what needed doing beforehand but there we go. When I have the thing I shall put up what mods need doing to it. I wouldn't mind getting one of these in the future, if you could let me know what you had to do, that would be smashing. I imagine it's just some shims either side to be fair. Quote Link to post Share on other sites
federalman Posted January 6, 2018 Share Posted January 6, 2018 I will do. I can’t imagine it’s a great deal, however people have said to contact Tegiwa and ask and I got absolutely nothing from them. I need some time on the lathe so all is not lost. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.