Jump to content

Headlights failed, relay?


Recommended Posts

My dipped and main beam failed last night while driving, which was fun.

Bulbs and fuses seem ok, so i'm guessing it's the relay, however It was clicking when the stalk was twisted.

I've still got all other exterior and interior lights, but no headlight / main beam light on the dash.

Am I right thinking it's the relay? Anything else it could be?

It's a '96 EP95 Reflet X if that helps.

Cheers!

Link to post
Share on other sites

I had the same problem a few years ago on a n/a Ep91 , thought it was the stalk or relay , but turn out to be the signal switch 12v wire from the stalk to the fuse box ( the one that tell the lights to come on and off when you turn the stalk ) , the wire looked fine but had corrosion inside causing it not to be making a connection , so replaced about 30cm of it and was spot on . The best way I found was to check was get a multimeter with long ends and test from the stalk plug to the bottom of the fuse box relays / light fuses for Continuity and that will highlight any issues if there is a brake . Hope this helps :thumbsup:  Toby 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...