Calum122 Posted May 7, 2018 Share Posted May 7, 2018 Hello, Can anyone tell me what the size is for the intake elbow from the intercooler pipe to the throttle body. I've bought several but always get it wrong (spesh) I think more importantly, does anyone know the angle that it's at. 45, 90 degrees? Cheers Quote Link to post Share on other sites
gorganl2000 Posted May 7, 2018 Share Posted May 7, 2018 (edited) the throttle plate is said to be 50mm, so i figure the TB outer diameter is around 52/55mm...whihc would indicate 2" at the TB end of the elbow and whatever size at the other end for the turbo piping you use (2", 2.25", 2.5", etc)....you may need some kind of reducer sized silicone bend depending http://www.tercelreference.com/tercel_info/component_library/engine_components.html#throttle%20bodies the stock elbow looks like 60/45 degrees may be better you take it off and measure up the TB and go use the elbow to match at the store Edited May 7, 2018 by gorganl2000 Quote Link to post Share on other sites
Calum122 Posted May 7, 2018 Author Share Posted May 7, 2018 I always get the angle wrong. I think 60 degrees is more the likely. Cheers. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.