Jump to content

Glanza ep91 dashboard cluster removal Help! Plz


Recommended Posts

Hi

I'm having a real pain removing the cluster to change the bulbs, all but one work.

I have removed the surround and unscrewed the cluster.  Disconnectrd the left and centre connector.  I can't get to the speedo cable or free the other connects.  There is very little movement in the cluster!

I can't seem to find a detailed step process for doing this! Sorry if I've missed it.  Is there a certain order or have I missed something? Any help apprisated. 

 

Cheers 

Link to post
Share on other sites
  • 2 weeks later...

To mention on my Glanza there are 3 electrical plug connectors at the top: left, middle and right.

Push in the squeezy clip located in the centre of each whilst pulling them out.

Then there is a white plastic 'over clip' on the top of the speedo cable in the centre of the clocks, that sits in a notch where it connects into the back of the clocks. Feel it with your fingers. Prise it slightly from one side with your fingers whilst sliding it down and off the speedo cable. Then the cable will come out with a bit of a tug.

Then the clocks will be free to remove.

Reverse the process when putting back in.

Edited by Farley V
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...