Ep82_Matt Posted May 2, 2019 Share Posted May 2, 2019 Hey lads, this has being covered many times but i need a second opinion, long story short ive no spark, my car is an ep82 5efhe build and at first i thought it was my ignitor untill i realised ive no 5v signal from the ecu, now everything is as it should be, 12v to ignitor coil and both are grounded to the firewall, what i discovered is the dizzy is not sending signal from the crank angle sensor G- to the ecu, also neither are G1 G2 or NE would i be right in saying the dizzy is whacked or is there something else causing this? Bit strange how all pins on the dizzy arent sending signal Quote Link to post Share on other sites
chrisp96 Posted May 25, 2019 Share Posted May 25, 2019 Did you ever find the solution? I'm having the same problems Quote Link to post Share on other sites
mccartney11 Posted May 26, 2019 Share Posted May 26, 2019 I had that issue and I replaced the distributer Quote Link to post Share on other sites
chrisp96 Posted May 27, 2019 Share Posted May 27, 2019 I found the problem mine was the ignition control module faulty Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.