Jump to content

Ryan-11's 342 whp, banzai mag featured glanza!


Recommended Posts

it all started about 4 years ago picked up my v looked like this

lol.jpg

glanza2-1.jpg

campy364.jpg

campy363.jpg

i was well happy biggrin.png but after about a month oil started blowing out the blow off valve, and a cracked manifold....... gutted, so after looking on the the net got a new manifold and found out its either turbo seals or piston damage.

so i found a second hand hybrid ct9 and snaped it up straight away, put it on along with my new manifold, took it for a spin, had a look under the bonnet and guess what........... OIL!!!!!

so made a phone call to toytuning (when they were good) about getting a forged engine built, after agreeing on a price took the engine out and sent it down to toytuning, couple of months later i had a nice new forged engine biggrin.png



glanza6.jpg

ohyeah.jpg

nollll-1.jpg

nolllllllll.jpg

DSC01348.jpg

when the engine was run run is i thought id take to crail for a few blasts down the quarter mile....... bad idea the boost spiked to 2 bar and blew the hybrid turbo oil seals, so on went the standard turbo and started saving for a td04 kit.

while saving up for the td04 kit i thought id treat the wheels to a few colours biggrin.png and cut the bumper out a bit more.

greenwhee.jpg

greenwheels.jpg

yellowwheels.jpg

glanza-1.jpg

glanza-2.jpg

the td04 kit arrived, got the kit on and took 5 time to try and map the emanage (nightmare) but its now boosting at 1.4/ 1.5 bar rolleyes.gif

this is how the v stands now

7068349a10607998339l.jpg

7068349a10607998575l.jpg

7068349a10607998470l.jpg

7068349a10607998690l.jpg

7068349a10607998886l.jpg

7068349a10607998986l.jpg

next on the list is to put my polished rocker cover and fuel rail on, give the engine bay a good clean and put my bc coilovers on as my trd shocks and springs are knackered.

Edited by Ryan-11
Link to post
Share on other sites
  • Replies 192
  • Created
  • Last Reply

Top Posters In This Topic

  • 5 months later...

right thought i better update this lol

fitted a few new suspension parts, bc coilovers, whiteline front and rear anti roll bars, lower arm bar and an anti lift kit.

also ordered speedvision 265 degree billet cams, speedvision valve springs, arp headbolts and a Cruise 1.4 mm headgasket. and just waiting on Ricky at Race-tech to finish his inlet manifolds then i can get the head rebuilt.

ive also got a td05 sitting in the house to go on.

ive got some new pics too

P1000986.jpg

P1000990.jpg

P1000991.jpg

P1000992.jpg

P1000996.jpg

P1000998.jpg

P1000993.jpg

P1000989.jpg

SDC10051.jpg

SDC10053.jpg

Link to post
Share on other sites
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...