Jump to content

*How to tint your fog lights JDM styleee! *


Recommended Posts

rite guys just thought id quickly whip something up just to show you how easy it is to tint your fog lights :)

tools you will need:

A4 sheet of stick-2-it's yellow tint film

clean rag and water

heatgun/hair dryer

sharp blade

1.

grab your rag and wet it and clean the front AND sides of the fog lights, basically anywhere the vinyl will touch, once done dry them off with clean rag.

102_0103.jpg

2.

cut your A4 sheet in half so each peace is big enough to cover your foglight with extra overlap

then peel your film and place carefully on the light.

102_0104.jpg

3.

now from the middle of the light outwards push all bubbles out and make sure the vinyl is down all over the surface of the fog light,

4. once you get to the edge of the light get your heat gun or hair dryer out and heat the edged and pull the vinyl tight so it sits nice on all the curves and edges.

102_0105.jpg

5. once this is done press it all down round all edges with your thumb just for safe measures , now get your sharp blade and cut round the back of the fog lens leaving a little bit of extra vinyl 1-2mm to tuck round the lens in the next step.

102_0106.jpg

6. once you have done this get out your heat gun / hair dryer and heat up the vinyl till it tucks itself round the back of the lense and push in with your thumb for safe measures.

wheeey your done!

102_0107.jpg

102_0109.jpg

this is my first how to so if it dont make sense im sorry lol

hope this helps :)

Link to post
Share on other sites
  • 6 months later...
  • 1 year later...
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...