Sign in to follow this  
Followers 0

Clock Conversion : Starlet n/a to Starlet SR cluster.

63 posts in this topic

Any chance the ep91 wiring is same as the ep82 mk2 cluster (also 3 connectors)? I have a mk1 cluster 2 plugs and a mk2 loom 3 plugs...


Share this post


Link to post
Share on other sites

Seen a few people getting confused about the 98 spec n/a wiring being different..

I tried this yesterday on mine and the wiring is different to the 96 spec.

But the SR clocks are a straight 'plug and play' into 98 wiring!!

I had the wires from the SR to match up and they are all exact same and everything works fine for me.

Thought I'd clear it up for a few people

Share this post


Link to post
Share on other sites

Gona try lhd 1996 EL54 Paseo cluster swap to lhd 1996 EP91 Starlet. A and B connectors seems to be same as uk model, C is different. Very good info here you guys, only missing written wire colors, order is same in many case, but colors are not same. RPM signal is black/blue in Paseo wiring by the way. Does Your area Starlets have low fuel sender in tank, only thing that I'm missing now, should I try connect it also, Starlet gauge don't have bulb for that. Same age Corollas have it in tank pump hanger?

20160805_182339_zpsndvm9msg.jpg

20160805_182408_zpswvsbulj4.jpg

Sorry, finnis language pin preparation, no use for english readers :) Gona write better with computer later...

20160806_205212_zpsthxct28v.jpg

Share this post


Link to post
Share on other sites

Working, what a job to solve every wire. Only door open light didn't work, have to solve it later at daylight. And drive with gps, maybe speed needle needs calibration, same scale but topspeed raised 180km/h to 200km/h.

20160808_221342_zpskillglky.jpg

Share this post


Link to post
Share on other sites

Today I I tried to install paseo clocks and I failed :/ rpms doesn't work.

In my case EP91 Starlet A6 black is rpm signal and needed to swap A10 (black/blue) in EL54 Paseo cluster.

Share this post


Link to post
Share on other sites

Easy to remove speedo connector off gearbox then clocks just push out easy for cable removal

Share this post


Link to post
Share on other sites

Looking to put white paseo dials in the 96 starlet sportif but wondering which wire do I use for tacho pulse. As previously mentioned A6 on starlet to A10 on paseo, but according to the wiring diagram (starlet), there is no A6.


Share this post


Link to post
Share on other sites

Hello lads, I'm after a bit of help please. I'm trying to fit a starlet cd model speedo head/clock to my solida! I was told cd model should be plug and play!! But it ain't. From what I seen when it was plugged in I had oil pressure light on constant no rev counter no eml and no full beam warning light. I have looked over the how to guide and the wiring in the guide looks different from mine. I can't seem to upload photos either but if anyone has any info in the mean time let me know thanks

Share this post


Link to post
Share on other sites

I have a UK S reg 1.3 NA. It does not have an RPM gauge, just speedo, temp and fuel.

What other clocks fit without chopping any cables?

Thanks

Edited by The Trooper 1815

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0