brendonware Posted April 13, 2014 Share Posted April 13, 2014 I have an 'aged' rocker cover and i dont like the sight of it. Whats the best way of cleaning it up? not sure if i fancy taking it off to get it powder coated again :/ Brendon**The old one was powder coated but developed a crack :/ hence the 'aged' one Quote Link to post Share on other sites
SpikeyJp_68 Posted April 21, 2014 Share Posted April 21, 2014 Use some gunk to clean it or you could use a wire brush if it's bad Quote Link to post Share on other sites
mikey4410 Posted April 21, 2014 Share Posted April 21, 2014 wire brush fitment on a corded power drill dude.otherwise u will be there forever Quote Link to post Share on other sites
brendonware Posted April 21, 2014 Author Share Posted April 21, 2014 Thanks!! Brendon Quote Link to post Share on other sites
Ashleygt Posted April 25, 2014 Share Posted April 25, 2014 wire brush on a drill then wet and dry sand paper 1200 then use a metal polish Quote Link to post Share on other sites
H_D Posted April 25, 2014 Share Posted April 25, 2014 paint stripper (notromorse) works a treatBrush it on leave it for an hour and it should wipe off repeat on any areas where it doesnt come off.Once all the paint is off use wet and dry sandpaper in the following order 1200, 1500, 2000 after it has been rubbed down with 2000 polish it up with autosol.You should get a mirror polish finish Quote Link to post Share on other sites
richdog Posted April 25, 2014 Share Posted April 25, 2014 As above nitromours works a treat. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.