Charlie28 Posted January 13, 2015 Share Posted January 13, 2015 Just wondered what power i should see with the following spec; Spec as follows; Forged EngineTD05 18g TurboWEPR Top MountTurbosmart Wasetgate460cc InjectorsEmanage Ultimate Going for mapping @ TD on the 7th Feb! Quote Link to post Share on other sites
Socks Posted January 13, 2015 Share Posted January 13, 2015 300-330 at 1.4-1.6bar Quote Link to post Share on other sites
Charlie28 Posted January 13, 2015 Author Share Posted January 13, 2015 300-330 at 1.4-1.6bar Got a 0.8bar wastegate spring so cant run anything more than 1.6bar. Be very happy with anything above 300bhp Quote Link to post Share on other sites
Socks Posted January 13, 2015 Share Posted January 13, 2015 SHould piss 300bhp..... Quote Link to post Share on other sites
Charlie28 Posted January 13, 2015 Author Share Posted January 13, 2015 SHould piss 300bhp..... Ok thanks bud Will update when i get it back from mapping Quote Link to post Share on other sites
maddox710 Posted January 13, 2015 Share Posted January 13, 2015 And lots of wheel spin Quote Link to post Share on other sites
jimmymac101 Posted January 13, 2015 Share Posted January 13, 2015 Wheres your LSD at ........ I hope you have one or as maddox said Hello wheel spin James Quote Link to post Share on other sites
Aamir Posted January 13, 2015 Share Posted January 13, 2015 His got a Cusco LSD, should be able to cope with that power Aamir Quote Link to post Share on other sites
Gainzy Posted January 13, 2015 Share Posted January 13, 2015 No ebc? Quote Link to post Share on other sites
tommyep82 Posted January 13, 2015 Share Posted January 13, 2015 Can u only run double the boost of the spring in wastegate say if I have .6 spring max boost would be 1.2 even with ebc Quote Link to post Share on other sites
Charlie28 Posted January 13, 2015 Author Share Posted January 13, 2015 I've got a GFB boost controller & Cusco LSD Quote Link to post Share on other sites
akyakapotter Posted January 13, 2015 Share Posted January 13, 2015 No need for Lsd haha I won't be running one for a good while Quote Link to post Share on other sites
Gainzy Posted January 13, 2015 Share Posted January 13, 2015 Can u only run double the boost of the spring in wastegate say if I have .6 spring max boost would be 1.2 even with ebcGood luck Charlie, you could run 1.2 bar on a 0.6 fine. Quote Link to post Share on other sites
DevonGT Posted January 13, 2015 Share Posted January 13, 2015 Can u only run double the boost of the spring in wastegate say if I have .6 spring max boost would be 1.2 even with ebc You could run 1.4 with a 0.6 spring. Quote Link to post Share on other sites
tommyep82 Posted January 13, 2015 Share Posted January 13, 2015 thanks Devon that's what I'm hoping to run Quote Link to post Share on other sites
RichWillmore Posted January 14, 2015 Share Posted January 14, 2015 You should make good power buddy, what injectors and exhaust size you running? There the two things that stopped me from getting 300, im determined to get 300 next time or im going to cry LOL Quote Link to post Share on other sites
Charlie28 Posted January 14, 2015 Author Share Posted January 14, 2015 You should make good power buddy, what injectors and exhaust size you running? There the two things that stopped me from getting 300, im determined to get 300 next time or im going to cry LOL Got a blitz nur spec exhaust system and 460cc injectors bud. Not sure if that exhaust system is big enough, but we'll find out! Quote Link to post Share on other sites
RichWillmore Posted January 19, 2015 Share Posted January 19, 2015 Yeah dude, im going to put a guess at 300-310. Hopefully more Quote Link to post Share on other sites
RobSR Posted January 19, 2015 Share Posted January 19, 2015 You should hit 320+ @ 1.6bar on your bits pal. You might find the injectors will getting near their limit tho. Quote Link to post Share on other sites
RichWillmore Posted January 20, 2015 Share Posted January 20, 2015 Im not sure what mines going to run next time, anything over 300 and i'll be more than happy. Forged 4-EFTETD05-16g3" WEPR Side ExitWEPR Drag Manifold SetupExternally Gated550cc InjectorsE-Manage Ultimate Anyone have a simular setup recently mapped? What figures do people think i will make? Thanks Guys, and Charlie im jacking your thread aha Quote Link to post Share on other sites
Charlie28 Posted January 21, 2015 Author Share Posted January 21, 2015 Im not sure what mines going to run next time, anything over 300 and i'll be more than happy. Forged 4-EFTE TD05-16g 3" WEPR Side Exit WEPR Drag Manifold Setup Externally Gated 550cc Injectors E-Manage Ultimate Anyone have a simular setup recently mapped? What figures do people think i will make? Thanks Guys, and Charlie im jacking your thread aha Ha, hope you see some big power too bud! Cant get oil pressure on my car, doing my head in! Dropping it off to my mates brothers garage on sat so hopefully he'll be able to sort her out! Quote Link to post Share on other sites
RichWillmore Posted January 21, 2015 Share Posted January 21, 2015 I dont understand whats coursing you the problems. Seems very strange. Im hoping for just more power than i have lol Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.