Jump to content

Recommended Posts

Hey lads, my names Hayden and im new here coming from way down south in New Zealand!
i recently bought a gt starlet(ep82) about half a year ago and have been doing a few mods to it. I've been wanting to start a build thread for a while now and am finally going to give it a go.

I brought her for $2100 nzd or £1200, it wasn't the tidiest and needed a bit of work but it ran so i got into fixing a few things straight away.first i stripped out the interrior but i have done a lot since i got it and will probably miss alot of small stuff but here is how it sat when i got it.

http://imageshack.com/a/img924/8101/40iwFv.jpg
http://imageshack.com/a/img922/9233/qqSXke.jpg

so that week it managed to blow a radiator as the fan wasn't working which i wasn't aware of so that weekend we got set and did an oil change and put a new radiator and coolant into it.

http://imageshack.com/a/img924/5751/qODPOK.jpg

the windows didn't work as the previous owner had swapped them out for windy windows for some reason and had the incorrect rails so we went down south about 8 hours or so to invercargill from christchurch and then back the same night with only 2 stops and picked this up for only $450, what a steal!!!

http://imageshack.com/a/img923/1513/pIfNpT.png

Keep in mind it was in very bad condition but i managed to salvage a few bits which i needed, the seats and rails as mine were no good, seatbelts as mine were burnt and couldn't pass wof with it. wof is like mot i believe. the window regulators, switches and some superlow lowering springs which don't sit low enough for me. i will invest in some coilovers at some stage. i also managed to sell a few bits, a hatch, petrol cap, bov that came with it, pod filter and parcel tray.

I didnt like the 17s that it came on and they rubbed at lock, so i got to saving and ordered some brand new 15x8 enkie 92 reps and a full new set of tyres which i got at a discount as my uncle works at a tyre shop. he fitted everything for me!!

http://imageshack.com/a/img924/6706/5CY6ju.jpg
http://imageshack.com/a/img923/7678/uRnWHX.jpg

heres how it sat on the new rims and lowering springs :)
http://imageshack.com/a/img924/9482/sMsLN0.jpg

http://imageshack.com/a/img924/9107/GF9cQr.jpg

one day after work i decided to go for a drive to my favorite spot which is in the port hills, a place called sugarloaf where everyone meets up and does skids and races etc
http://imageshack.com/a/img924/6263/Y0dJ9a.jpg

my old man had some tail light tint so i decided to spray a few coats on and see how it looked. i love it :)))

http://imageshack.com/a/img923/6861/hlCNBX.jpg

my friend who owns an evo 6 had taped his headlight for that angry look and told me to give it a go so here's how it looked after i tried that, not too bad in my opinion :/

http://imageshack.com/a/img924/5195/q6MXHh.jpg

went up to sugarloaf again with my friend in the evo and another friend who has a primera, love this pic

http://imageshack.com/a/img924/170/CKdWZe.jpg

we chilled there for a bit then another friend of mine showed up in his holden commodore, he did heaps of skids which i can upload if anyone is interested. some pics he took of our rides parked up on one of the bays down the hill.
http://imageshack.com/a/img921/7771/iQo16x.jpg

http://imageshack.com/a/img921/6093/W59v7Y.jpg

heres the last picture i took before unfortunately i had to park her up(its been 4 months at the time of writing this).
http://imageshack.com/a/img921/8062/4aVZh7.jpg

been parked up for a while now and it saddens me coming home from work every day and just seeing her parked out on the street in bits. first of all the manifold had cracked so i got onto getting that welded. i have a pic of the big ass crack somewhere but cant find it so heres a pic of the turbo, manifold and wastegate all taken off.

http://imageshack.com/a/img921/2561/QKkvXI.jpg

i have brought shitloads of parts since shes been off the road. including a new fmic and piping kit, new civic radiator and mounting kit, hks ssqv, some nzkw bucket seats and mounting brackets, new nzkw steering wheel and boss kit, boost, oil temp and oil pressure gauges with pod, new shifter, magnicore blue racing leads and ngk iridium spark plugs, front strut brace and a rear 3pt strut brace plus heaps more.

http://imageshack.com/a/img923/9541/IwWwuq.jpg

this last week ive pulled off the rocker cover and cleaned it all up and drilled a hole where the metal breather was to get some an10 hydraulic hose fittings welded in and sand blasted

http://imageshack.com/a/img923/6421/yNT4e8.jpg

this is all i have for now but will keep you all up to date :)
cheers for reading!
Link to post
Share on other sites

Welcome along. Nice list of bits youve got to go on, andbe careful with that front bumper its a mk1 gt bumper so very hard to get hold of.

Also where about in NZ you from, im currently travelling around there/here for another 5/6 odd weeks

Link to post
Share on other sites

Ahh thats a shame, atleast you cant take the blame for it i suppose!

Ill be down in christchurch in a few weeks, if youre about would be good to say hi. I've met up with stu in the north island who is a great guy and a wealth of knowledge so would be cool to meet another fellow kiwi whilst im out this way :)

Link to post
Share on other sites

Ahh thats a shame, atleast you cant take the blame for it i suppose!

Ill be down in christchurch in a few weeks, if youre about would be good to say hi. I've met up with stu in the north island who is a great guy and a wealth of knowledge so would be cool to meet another fellow kiwi whilst im out this way :)

Yeah man that would be cool! Might not have the starlet running by then as I'm waiting from some parts from the uk which take about 3 weeks to get here :( but if I do I'll have to take you for a wee cruise up my favorite spot as it recently opened up again after there was a big forest fire :( Edited by EPIC82
Link to post
Share on other sites

nice progres mate i like

morgey mate you might aswell stay there few months weather still sucks over here anyways ha ha

Cheers mate :)

Small update, managed to sort out my new steering wheel. Found out that the bosskit I brought was only for wheels with quick release so there was no room for my horn button and I didn't feel like wiring a separate button for it so I ended up buying an adapter which also didn't fit as I read the measurements wrong :(

Well after that I decided to try the old boss kit as it had a mono on there already and that as enough room for the horn however the new wheel didn't fit onto it so I chucked he adapter on there as a joke to see how long I could extend the hub and realized that it fit lmao. So I just dropped the wheel as low as it would go and its actually a great fit 👌

Here's how it sits :)

http://imagizer.imageshack.us/a/img924/3485/g1B0xg.jpg

After fiddling around in the garage finding some hardware and then under the car which is not fun with how low it is and not lifting it with the jack. I managed to also get this Ultra Racing 3 point strut brace in, looking good if you ask me :)

The car is a mess at the moment as I'm doing a lot of different things on it in different places haha

http://imagizer.imageshack.us/a/img921/9215/xwSRhq.jpg

Still waiting on some parts but I should be able to update within the next week hopefully

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...