Jump to content

Recommended Posts

Hi I'm Rob I'm a new Glanza v owner from northern Scotland

Car is going to be used on the weekends and for sprint's currently working in Bulgaria so not much will happen this year or next ( need a house ) but I'll potter away to tidy it up etc

 

V7XTOv.jpg

 

LahKlI.jpg

 

Sorry about the lack of pics no laptop in Bulgaria lol - attached the spec from Matthews advert

 

- 98 Spec Glanza-V non sunroof in 040 white

- 172,000ish KM - not converted so mileage is accurate.

Stock bottom end, recently inspected by Rob Boston Racing and given a clean bill of health along with cambelt change, sump re-seal, crank seals etc all done recently.
RaceTech EWG TD04 kit with SS manifold, 2.5" de-cat downpipe and VTA screamer. Port matched turbo to manifold.
Turbosmart 38mm V-band external wastegate
Braided oil and water lines
RaceTech 2.5" SS exhaust system (single silencer, 3.5" tip)
FMIC with 2.5" alloy piping
Alloy 1/2 rad + 10" slimline fan
Smoothed & polished rocker cover with AN port conversion for breather
RW Developments breather tank with stainless braid and AN8 aeroquip fittings
Oil cooler kit using mocal sandwich plate, AN10 aeroquip fittings and stainless PTFE lined braided hose to 15 row oil cooler mounted behind I/C
Magnecore blue HT leads with matching king lead
Walboro 255lph pump upgrade
Iridium plugs
Apexi boost solenoid
Gizmo IBC-II boost controller set up with three settings
Greddy EMB

Mapped by Ricky at RaceTech to 0.83bar and 1.10bar and made 227bhp @ 1.10bar. Print out will be included.

OEM LSD C52 box in mint condition with recent shaft seal replacement done using genuine Toyota parts.
Comp Clutch Stage 4 paddle clutch (very low mileage/use)
Fidanza lightened flywheel
Hyper Sport quickshift
Millers transmission oil (not cheap!!)
Re-built CV joints with new boots and clips and fresh moly-lith grease
Poly bushed engine and box mounts

Meister-R Zeta CRD Coilovers with pillowball front top mounts and camber adjustability
Coilovers socks - immaculate underneath these
Whiteline anti-lift kit + poly bushes
Cusco adjustable panhard rod
Whiteline adjustable rear ARB
OEM front strut brace
OEM rear 3 point brace
PAS delete with properly looped rack (best thing I ever did to this car!)

ST185 Celica single pot brake conversion using Mk4 Astra grooved discs, Ferodo DS2500 pads and braided lines
Standard rear brakes freshly serviced
Recent replacement of all wheel bearings  
Motul RBF brake fluid
Discs recently skimmed and brakes fully stripped and serviced.

Rota Grid 15"x7j ET35 wheels powdercoated in gloss white
Genuine RAYS anodised red alloy wheel nuts with locking nut
Avon ZZR semi-slick tyres fitted all round with plenty of life left for road or track use (although they're quite noisy on the road, sounds like all four wheel bearings have gone at once!)
Full alignment/geo done by Rob Boston at RBR

Varis FRP front bumper fitted with BYC style chassis mounted splitter legs, marine ply front splitter
Bumper secured using locking aero catches and wing ties
Standard 98 Spec skirts and rear bumper
Very VERY clean car with ZERO rust

2x Corbeau Clubsports (XL) mounted using proper T45 welded-in mounts and side mounts with plenty of adjustability/movement.
Genuine OMP suede dished 330mm wheel with Sparco QR boss
ARC Autosport weld-in half cage with harness bars
Cruise shift knob & extension piece
3x Pro-Sport gauges (oil temp/oil pressure/water temp)
HKS 60mm boost gauge mounted on dash
Fully stripped interior no headlining or rear trims but dash intact and still has door cards, electric windows and electric mirrors that retract.
NO STEREO (although I did keep the wiring in place if you wanted to re-fit one and I do have a stereo I can include with the car, not that you'd be able to hear it)
Still has infrared remote central locking too!

 

 

 

 

Edited by Bopthebear
Link to post
Share on other sites
  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

Hi mate my plans are to get the interior all painted as it's got the cage in unpainted and going to treat it to alot of carbon from Fiske :)
 

I'm just going to make it my own as I don't plan punting it eventually forge it will be a long term project, edited the first post with the spec

Link to post
Share on other sites
  • 3 months later...

Well been a while since ive updated this now that im home and collected the car!

 

Started working on it degreasing every inch of it and it's had a full correction to the paintwork by myself and other detailing buddy just going round the entire car tidying it up

Got the foglights working and wired in the turbo timer have been having difficulty with my oil temp gauge sender and gauge work just not getting any temperature registering

 

More pics soon cheers

 

 

 

 

IMG-20181120-WA0024.jpeg

IMG_20181119_004105_295.jpg

IMG_20181118_224615_719.jpg

IMG_20181118_235400.jpg

IMG_20181113_205608_194.jpg

received_289175941685889.jpeg

Link to post
Share on other sites
  • 5 months later...

Been a while since I updated this so here we go

Sourced a genuine varis carbon bonnet, genuine varis rear bumper and skirts so bonnet is on
Binned the st185 calipers for 6 pot ksports and the rotas have been tossed off for speedline challenges done in white pearl so has a flake threw it

 

Rear carbon Cusco brace and Cusco front brace

 

Pictures can do the talking

 

IMG_20190503_172851.jpg

IMG_20190501_140713_871.jpg

IMG_20190330_084919_689.jpg

IMG-20190428-WA0010.jpg

IMG-20190430-WA0024.jpg

IMG-20190503-WA0040.jpg

IMG-20190502-WA0028.jpg

IMG_20190502_085840.jpg

Link to post
Share on other sites
  • 2 weeks later...

Few more updates - Ever since I bought it was leaving big blobs of oil on the drive so my mate stripped it all and so far we have replaced

OEM oil pump - old one was severely worn

Timing belt and tensioners and water pump

 

Crankshaft seal, Camshaft bung, Rear main seal, distributor o ring seal, rocker cover gasket, basically any seal we've replaced, ORC Ogura is going in it soon with miller's gearbox oil

 

Also bought a carbon spoiler from Fiske which should look good

 

And relocated the battery

 

 

 

 

IMG-20190519-WA0026.jpg

IMG-20190518-WA0043.jpg

IMG-20190505-WA0016.jpg

Link to post
Share on other sites

Well it's finally coming together few little things to sort now and hopefully get it MOT'ed

 

Made a list of what's been changed or updated

 

16" speedline challenge refubed in pearl white with Nankang NS2-R 50/50

Engine all seals and oil pickup, oil pump, water pump, top end gaskets replaced including timing belt tensioner kit, plugs gapped and replaced

Oil flushed and gearbox oil flushed replaced with miller's oil, ORC Ogura clutch/flywheel kit to go in

Battery relocation to boot

Ksports installed with yellow stuff pads, braided hoses all round, brake fluid flushed and replaced, rear pads replaced

Coolant flushed and replaced

AEM afr installed and bung welded in to exhaust

Hypersport shifter binned replaced with TRD short shifter and genuine varis gearknob

C pillar brace installed

Cusco brake stopper installed

Modified the defi oil temp sender location no reading now solved

Standard door cards binned, track day door card's installed

 

 

 

received_554573305071334.jpeg

IMG-20190502-WA0043.jpg

IMG-20190502-WA0042.jpg

Edited by Bopthebear
Link to post
Share on other sites
  • 3 weeks later...
On 6/22/2019 at 11:04 AM, H_D said:

Brilliant clutch and excellent pedal feel, I have the same clutch on my V

Hopefully I'll get to try it out pretty soon been a very long project that wasn't actually meant to turn into this but once I started I thought well - I'm this far in I may as well just do it all properly and once still not fully happy with the car but it's alot better than it was

What power do the oguras handle does anyone know?

 

Got a gold intercooler for a really good price on eBay to continue the white and gold theme

Screenshot_20190624_222139_com.ebay.mobile.jpg

Link to post
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...