Jump to content

DIY TD04 Water lines


Recommended Posts

20190202_105230.thumb.jpg.683f7f866ecbc78e0b82dfc99cfc4891.jpg

 

Got my td04 water lines locally for £50 all in. If you source all the parts yourself it will probably be a bit cheaper. If anyone is making their own you will need the following...


2x m12x1.25 to an6 adaptors 
2x 45 degree an6 fittings.
An6 braided hose (length varies on different setups)
2x an6 hose end finishers. 

The an6 hose diameter is a touch smaller than the water pipes on the thermostat housing, dip the hose end in hot water for a few mins and they slide on without much force.

 

Edited by H_D
Link to post
Share on other sites
  • 1 year later...
4 hours ago, bailiff666 said:

Hi H_D

Can you let me know what I need to fabricate oil line and what’s your solution for oil return line 

Also what’s the lengths of all lines? My turbo is in standard location 

Send me a pic of your set up il have a look for you

Link to post
Share on other sites

If its for a ct9 that sits in the stock position just use the original oil and water lines. My guide is for a TD04 🤦‍♂️

Edited by H_D
Link to post
Share on other sites

If its using a ct9 core the fittings are different. If its a td04 core then u need all the bits i mentioned in the original post. Will the oil feed be positioned facing straight up

Edited by H_D
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...