Dean_mc88 Posted June 14, 2019 Share Posted June 14, 2019 There seems to be lots of info on using the skyline variable TPS except the main thing of what wire goes to what. Any help on this would be greatly appreciated i have plugs for both the wired piece on the main plug with brand new pins. Thanks in advance Quote Link to post Share on other sites
Ryan.Truesdale Posted June 14, 2019 Share Posted June 14, 2019 Hi pal you only use the plug with the wires out of it. Quote Link to post Share on other sites
Dean_mc88 Posted June 15, 2019 Author Share Posted June 15, 2019 cheers mate received your message Quote Link to post Share on other sites
Dean_mc88 Posted June 16, 2019 Author Share Posted June 16, 2019 For anyone wanting to do this i believe you use the wired plug coming from the top of the GTR TPS as shown in the picture. if you are using a glanza loom it should be Glanza wiring: SKYLINE R34 GTR TPS BLACK/RED = POWER TO RED = 5V POWER BROWN/WHITE = GROUND TO BLACK = SENSOR GROUND YELLOW/RED = TPS SIGNAL TO WHITE = TPS SIGNAL I will hopefully confirm this is 100% correct soon Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.