Thonfella259 Posted March 14, 2020 Share Posted March 14, 2020 (edited) time for a little update🙂 car has been done for a while now but can’t get it on the road due to Covid 19. Had to tidy up a few thing but only recently I have got my hands on some triumph tt600 itbs, det3 and a AEM wideband👌 Will also be using DIY det cans to detect knock as I want to play about with timing (can post a tutorial) Will hopefully get the car started with the itbs fitted this weekend if all goes to plan, will definitely be throwing up some videos and pictures when the time comes will leave all my old pictures up for all to see👍 Edited November 9, 2022 by Thonfella259 Quote Link to post Share on other sites
Sam44 Posted March 14, 2020 Share Posted March 14, 2020 Hello. Tidy work, what are your plans. Quote Link to post Share on other sites
Thonfella259 Posted March 14, 2020 Author Share Posted March 14, 2020 (edited) Well sam👋,now the paint is faded from sitting outside for 4 years so I’ve bought a buffer and I’ll try and restore it as much as possible and then hopefully get a respray in the future👍 Edited June 23, 2020 by Thonfella259 Quote Link to post Share on other sites
Thonfella259 Posted June 23, 2020 Author Share Posted June 23, 2020 Just waiting hose clamps and vacuum hose👌 Quote Link to post Share on other sites
Thonfella259 Posted July 4, 2020 Author Share Posted July 4, 2020 Another update folks, got the itbs on, vacuum pipes sorted and mapped her myself with the det3 with aem wideband using datalogging💪👌 Quote Link to post Share on other sites
Sam44 Posted July 4, 2020 Share Posted July 4, 2020 Loving this nice work. What size itb have you gone for. Quote Link to post Share on other sites
Thonfella259 Posted July 5, 2020 Author Share Posted July 5, 2020 55mm Sam, will have to get a video from under the bonnet because theydo sound class👌, have some velocity stack coming aswell🤤 Quote Link to post Share on other sites
Claymore Posted July 5, 2020 Share Posted July 5, 2020 Think they're 45mm I/D mate according to danstengineering. https://danstengineering.co.uk/Velocity-Stack-Kit-for-Triumph-TT600-Throttle-Bodies-All-Lengths Also I believe they taper to a smaller diameter at the head side. (37mm according to a mazda miata website post). 55mm is too big for a 1.3 litre revving to 6k rpm. FYI my previous car had 46mm itb's, 2.3 litre revving to 7k rpm. Quote Link to post Share on other sites
Sam44 Posted July 5, 2020 Share Posted July 5, 2020 3 hours ago, Thonfella259 said: 55mm Sam, will have to get a video from under the bonnet because theydo sound class👌, have some velocity stack coming aswell🤤 Big itb setup. Keep up the good work. What management have you gone for?. Keep me posted on the results please if possible. Quote Link to post Share on other sites
Sam44 Posted July 5, 2020 Share Posted July 5, 2020 2 minutes ago, Claymore said: Think they're 45mm I/D mate according to danstengineering. https://danstengineering.co.uk/Velocity-Stack-Kit-for-Triumph-TT600-Throttle-Bodies-All-Lengths Also I believe they taper to a smaller diameter at the head side. (37mm according to a mazda miata website post). 55mm is too big for a 1.3 litre revving to 6k rpm. FYI my previous car had 46mm itb's, 2.3 litre revving to 7k rpm. Thanks for this information, yeh about a 37/38mm for the reasons you have mentioned. So the 37mm internal diameter is bang on. My 1.6ltr cvh MK1 fiesta had pinto 2ltr side draft 45mm delortos on it and these were a mistmatch. Quote Link to post Share on other sites
Thonfella259 Posted July 5, 2020 Author Share Posted July 5, 2020 55mm is the outside diameter on the intake side🙈, as for management I’m just using a det3 on piggyback mode with aem wideband, only real adjustments I had to make is try to make it idle and it was running slightly rich up top and lean down low in the revs which I have corrected but other than that shes sweet👌 Quote Link to post Share on other sites
Thonfella259 Posted July 11, 2020 Author Share Posted July 11, 2020 View of the throttle bodies under the bonnet😫😍 6DD95247-227B-4E9F-B626-D55F3C122D6B.MOV Quote Link to post Share on other sites
Sam44 Posted August 20, 2020 Share Posted August 20, 2020 (edited) Some really enjoyable builds taken place. Great idea on the stacks. I think 1 saw some 1 Cut the standard manifold just after the 90deg upturn angle faceing the itb upwards giving more Room for stacks and itg filters. Keep them updates coming. If you fancy a 4efte inlet cam I've got lots here. Edited August 20, 2020 by Sam44 Quote Link to post Share on other sites
Thonfella259 Posted August 20, 2020 Author Share Posted August 20, 2020 5 hours ago, Sam44 said: Some really enjoyable builds taken place. Great idea on the stacks. I think 1 saw some 1 Cut the standard manifold just after the 90deg upturn angle faceting the itb upwards giving more Room for stacks and itg filters. Come them updates coming. If you fancy a 4efte inlet cam I've got lots here. Cheers Sam, is it true that they have slightly more lift than the 4efe??? Quote Link to post Share on other sites
Sam44 Posted August 20, 2020 Share Posted August 20, 2020 (edited) Yeh I'll put a picture up. look on Toyota GT turbo site I've explained the 4efte and 4efe Dyno graphs. it's obvious on that, but to confirm I'll get my micrometers on both sets I've got in Fleetwood and post it. I've measured alot of the cams the 5ehfe, 5ehfe acis intake, 4efe ep91 4efte so far have different cams with the exception of the 5ehfe acis having a different exhaust cam as well. I have yet to measure the gen1 corolla 4efe and the gen1 ep80 gi which I have in the engines at home ready to come out. The 4efte inlet cam adds around 1500 more peak torque in the rpm range on the 4efe drops out very fast around 4500rpm zero valve overlap. It's very noticeable hunting the 70 to 120mph speeds alot better. Edited August 20, 2020 by Sam44 Quote Link to post Share on other sites
Thonfella259 Posted August 20, 2020 Author Share Posted August 20, 2020 1 hour ago, Sam44 said: Yeh I'll put a picture up. look on Toyota GT turbo site I've explained the 4efte and 4efe Dyno graphs. it's obvious on that, but to confirm I'll get my micrometers on both sets I've got in Fleetwood and post it. I've measured alot of the cams the 5ehfe, 5ehfe acis intake, 4efe ep91 4efte so far have different cams with the exception of the 5ehfe acis having a different exhaust cam as well. I have yet to measure the gen1 corolla 4efe and the gen1 ep80 gi which I have in the engines at home ready to come out. The 4efte inlet cam adds around 1500 more peak torque in the rpm range on the 4efe drops out very fast around 4500rpm zero valve overlap. It's very noticeable hunting the 70 to 120mph speeds alot better. Very interesting Sam, always thought 4efe and 4efte cams were the same, shoot me a message there and we can get something sorted👌 Quote Link to post Share on other sites
Sam44 Posted August 21, 2020 Share Posted August 21, 2020 (edited) Yeh, this was explained to me by the original owner of the car. Ho gave me a full tuning guild with specs and information he obtained since 2008. I'll message you now + post some pictures of the difference on the micrometer. As I explained on GT turbo site in the graph you can see it's obvious. Not sure were other tunners had there heads/eyes. I can't find 1x post of a 4efe knowingly using the intake cam and it's a perfect match for the late corrola inlet Edited August 21, 2020 by Sam44 Quote Link to post Share on other sites
Gricey2002 Posted September 23, 2020 Share Posted September 23, 2020 nice work mate, good to see someone else running itbs on a starlet had the same setup on mine for a while, sounded great Quote Link to post Share on other sites
Sam44 Posted October 4, 2020 Share Posted October 4, 2020 Check out my build I've put up the difference in lift between the 4efe and 4efte inlet cam. I've also got afew turbo cams here I could sell. Would be good to see one on your build. Quote Link to post Share on other sites
Thonfella259 Posted May 10, 2021 Author Share Posted May 10, 2021 Haven’t been on here in a whiiiile, few more things done to the car •rebuilt head •port and polish •fidanza lightened flywheel •and a lovely set of superlites👌 Quote Link to post Share on other sites
Sam44 Posted May 11, 2021 Share Posted May 11, 2021 Proper little build this. Great read. Keep it up. Quote Link to post Share on other sites
Thonfella259 Posted May 11, 2021 Author Share Posted May 11, 2021 Cheers Sam, will get a video up soon, proper little rocket now (for a 1.3)😂 Quote Link to post Share on other sites
Thonfella259 Posted November 14, 2021 Author Share Posted November 14, 2021 Small update👍 Quote Link to post Share on other sites
burty Posted November 14, 2021 Share Posted November 14, 2021 Rocker cover looks great Quote Link to post Share on other sites
Sam44 Posted November 15, 2021 Share Posted November 15, 2021 Same from me. Looks built by the factory quality. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.