Jump to content

Ray's Race Build! *Brake Induction Kit Install Finished*


Recommended Posts

Hi All,



I have just decided to do a build thread after buying my car back in october 2013 so here it goes!



Spec List



Engine:

74.5mm ross forged

pauter rods

polished and knife edged crank

lightened pulley

all new bearings and seal

new cam belt

2mm Multi Layer Head Gasket


Fueling

470cc Injectors

255l Walbro Fuel Pump

TD High Flow Fuel Rail

Sard FPR


Cooling


AutoBahn Front Mount Intercooler

Alloy Civic Rad

Relocation Air Filter Kit(Come out just behind grill)



Turbo:

TD04 Hybrid Lateral Performance

Custom Downpipe


Full Exhaust System (Got a HKS Hi Power to be fitted)

Mild Steel Mani And Custom Exhaust

Custom Decat


Transmission:

spec 6puk paddle clutch

TD Light weight flywheel


Electronics:

Dastech Management Unit

Start/Cut off switch

Fan toggle switch

Fuel pump toggle switch

HKS EVC 6 Boost Controller


Chassis:

6 Point Carbing Roll Cage

Polycarbonate Sunroof

BMW E30 Wheels

Cusco Front Strut Brace

Poly Engine and gear box Mounts

White Line Front Anti Roll Bar

White Line Rear Anti Roll Bar


BC Coilovers

RSR Pan Hard Rod



Brakes

4 Pot Wilwoods

Braided Lines


Vented and grooved disc

Yellow pads



How I brought it:


1380028_10153356714065254_1001361072_n_z

1377234_10153356714130254_1986998544_n_z

1383953_10153356713965254_2091110115_n_z

1044402_10153356714385254_510469986_n_zp

1380465_10153356714270254_1606044265_n_z


Currently has print off running 247BHP 220lb Torque


Work Begins :)


Strip out all the rear

1375295_10153356714490254_22816192_n_zps


Clean up and rearrange the engine bay...


Current Condition


1380588_10153356714745254_1385390413_n_z

1385352_10153356715615254_1642709169_n_z

1378312_10153356715260254_738998287_n_zp

1374993_10153356715485254_133665364_n_zp


Started to do some cleaning up today will carry on updating

1395912_10153356715945254_2000687487_n_z


Found this while taking the intercooler apart for cleaning

537273_10153356716210254_935701329_n_zps

All sorted :p

1374993_10153356716905254_260529659_n_zp


Engine Bay All Sorted!

1392479_10153362143205254_204263754_n_zp

1381801_10153362143395254_1195697040_n_z

1379559_10153362143300254_325515819_n_zp

Started Painting The Back

37050_10153362143465254_1304425504_n_zps


Fitted RSR Pan Hard Rod

1392049_10153364997365254_152372789_n_zp


Had to remove sunroof to allow room for cage. before the roof can out

photo1_zps301bd97d.jpg

Polycarbonate Filler

photo2_zps9e8d7276.jpg

photo3_zps5333e5cb.jpg


Today finally got the time to work on the car/Losing my bite point so was time for the gearbox to come out (01/02/2014)

image-11_zps93d7a673.jpeg

image-8_zpsad6dc5fc.jpeg

image-19_zpsf2ce4672.jpeg


Found the Issue with the clutch

image-14_zps6b396dbf.jpeg

Think its time for a new flywheel aswell :)

photo_zpsa71828e7.jpg


After finding out the clutch was fucked decided to move onto the brakes as they have been sitting around for the last couple of months.


image-10_zpsd5972a89.jpeg


Has to take a bit off the heat shield to fit the disc

image-15_zpsd39b84d2.jpeg


Brakes Finally On

image-6_zpsdf1ccd80.jpeg

image-16_zps795a352e.jpeg


Finished for the day :)

image-20_zpsd6fe7f64.jpeg

Edited by TD04HYBRID
Link to post
Share on other sites
  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

UPDATE!



Here a few of the cage ( needs a tidy up)


image-72_zps0b462efc.jpeg


image-82_zps8ba1d081.jpeg



So after finding out needed new clutch and flywheel and that i couldnt get that till Tuesday i decided to clean the gearbox and pain it up.


photo1_zps928e41ec.jpg


photo3_zpsda0ff577.jpg



And spray a few other bits


image-42_zpsd6bb4985.jpeg


image-62_zps3d254835.jpeg


image-92_zps5ea27890.jpeg



Also Decided no need for a radio so took that out and getting ready to do a custom job there


image-52_zpsda0d5ef8.jpeg


Link to post
Share on other sites

So While i waited for my clutch & flywheel to come i started to custom make a gauge and toggle switch holder and start running the wires through.



image-74_zps8eaa06e2.jpeg


image-64_zps6d3785c4.jpeg


image-84_zps16e206d3.jpeg



Then done a template for the gauges and switches


image-44_zps2442e7f8.jpeg



Then Carbon Wrapped it


image-83_zps7144a050.jpeg


image-93_zps10a2c89a.jpeg



Toggle switches!


image-63_zps202bb864.jpeg



Then turn up 3 packages :) Spec 6 Puk Clutch/TD Lightened flywheel & HKS Hi Power Exhaust System


image-94_zpsa278c6b5.jpeg


image-73_zpsd83cb736.jpeg


image-102_zps8c737c38.jpeg



All bolted on


image-53_zps429d221b.jpeg



Will keep updating as best as i can


Link to post
Share on other sites

Starting to all come together now! Gearbox is all back on, driveshafts! Wilwood 4 pot brakes with grooved disc and yellow stuff pads in front, braided lines on rear all bled and tyres on! Noticed rad is leaking so new one on the way and thought I would check the thermostat is fully functioning noticed the seal had gone so need to order one! Toggle switches still need wiring up and then thinking about spraying inside and cage!

Will get up some pics once it's had a good clean!

Link to post
Share on other sites
  • 2 months later...
  • 2 weeks later...

Over the last couple of months i have been collecting parts ready to be assembled! really wanted to do the handling side before any more power but some things you cant refuse ;)



Full HKS Hi Power Exhaust - I fully heat wrapped the exhaust brought uprated mounts and all new gaskets


Full Blue Hose Kit


Sard Fuel Pressure With Braided Lines


Whiteline RARB


Whiteline FARB


TD Fuel Rail And Bradided Lines


Spare Rocker Cover to fit Braided lines to



Lil teaser of parts collection:


image_zps2f62fc64.jpg



So after a load of effort to start work on the car after work as never have time the weekend the work had begun! i first started by getting my anti roll bar that i had sprayed fitted


image_zpsa228eace.jpg



I have been speaking Keith at Zisco that is making me a lil something for my TD04 Lateral Performance one off turbo :) so the stripping needed to be started


image_zps00bc4b45.jpg



Exhaust half off need to cut it in half as previous owner decided to wield the joins :(



Comment welcome guys!


Edited by TD04HYBRID
Link to post
Share on other sites

Nice project! Question on the switches, the fan is that to switch it on whenever you want?



Now the weather is getting hot, I'd like to add a manual override to my rad fan to keep temps cool


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...