Cyanidesid

I got the sard for a trusted starlet part seller All the instructions and box was in Japanese so I'm 99% sure it's gen

Hey guys I have a zep ecu that came on my Glanza v I want to know how they run with td04's ..??? Upgrades due to be put on the car .... Forged engine Tdo4 Sard fpr Fmic 225 fuel pump

.

.

.

Wanted. Ep91 mid spoiler pref 040 white but any colour otherwise

.

After a td04 manifold because mine keeps cracking

....

I'm looking for a strong 4efte engine got me Glanza Preferably just been rebuilt and prof of cylinder psi if possible don't need turbo or manifolds IN the uk don't mined traveling

I would need it posting guys how much are you wanting ?

yes please

As the title says

25mm? I was told 15mm was max

Hey guys and gals I'm about to make a diy short shifter by lengthening the the stick by the bottom by 10mm ! Has anybody had any problems with shifting gears being tight ect !! I know I have to space the between the floor and shifter too

What wheels are these and are the worth anything? Says work japan but I need the name of the style if poss

Good news got to the bottom of the issue Waste gate was stuck open due to acuator bar twisted . Can't wait to go boosting

No the gauge points to the left 20 when running and then once under load it goes to 0

Am I right in saying it should still boost up even on stock ecu and tuning ?

The impeller is spinning up when running would this still do that even if turbo is goosed ?

It's a braided oil feed I did pour oil into where the oil goes in on the turbo

there doesn't seem to be any play in the shaft !! Also for got to mention I don't have a air filter would this matter ?

Hey peeps I recently installed a td04 turbo and manifold combo (internal waste gate ) and I don't seem to be hitting boost . On my boost gauge it goes from 20 to 0 and no further not even the dump valve works 😳 I've Bridged the acuator and turbo !! I've also taken off this pipe from the acuator and blocked it to see if I get boost and still nothing ! Also no loose pipes on fmic ect what's the next step? I have a emanage and boost controller yet to fit but I wanna get to the bottom of the boost issue before fitting these

As the title says