steve_starlet_glanza Posted February 20, 2010 Share Posted February 20, 2010 Anyone know to hand what tools i will need to remove spolier on a glanza? cheers Quote Link to post Share on other sites
Idrees Posted February 20, 2010 Share Posted February 20, 2010 A rachet with a 10mm socket, maybe an inch extension or just a deep socket. Pop the clips off in the corners of the tailgate on the inner side, undo the bolts and unclip and brake light and then just push up on the spoiler and it will pop off. It isn't bonded on from factory, it just has clips on it that's why you need to push it upwards.Idrees Quote Link to post Share on other sites
steve_starlet_glanza Posted February 20, 2010 Author Share Posted February 20, 2010 thanks a lot, asked about bonding as i comes quite a way down tailgate and theres no fastenings, if its only 2 10mms will pop it off in morning thanks again! Quote Link to post Share on other sites
Idrees Posted February 20, 2010 Share Posted February 20, 2010 Thank god it's not bonded, it would be a nightmare to remove if it was! Just remember you need to push it upwards, it may be a little stiff but should be fine after a nudge or two. Good luck!Idrees Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.