Wastegate

[Azz]

Can anyone point me in the rite direction on how to plumb in my wastgate plase ( vacuum pipes) , its only a cheap one as im still changing bits around.

It will not be ran with a b/c at the moment.

Cheers Aaron

[Azz]

anyone please

[Ryan-11]

run a vacuum pipe from the turbo to the bottom pipe on the wastegate, it will boost to whatever spring u have in the wastegate

Edited April 15, 2012 by Ryan-11

[Azz]

run a vacuum pipe from the turbo to the bottom pipe on the wastegate, it will boost to whatever spring u have in the wastegate

Cheers budy but what about the top one ?

[Ryan-11]

Cheers budy but what about the top one ?

Just leave it as it is.

[Azz]

just open to the air like?

[Ryan-11]

Yeah mate, it only gets used with an electronic boost controller.

should look like this, apart from my vacuum goes to my inlet mani because i dont have a vacuum port on my turbo.

[Azz]

Ah rite i get you now, Cheers matey

[Flaminsam]

the top is to pre charge the spring pressure. so if your spring pressure is 0.8bar if you allow 0.2bar to enter the top it will give you 1 bar of boost pressure if you get me. you will need to pipe in a bleed valve or possibly a electronic boost controller.