Aamir Posted February 15, 2014 Share Posted February 15, 2014 Hi all I've been putting my car back together to find that I'm having a problem when trying to bolt my slave cylinder on my gearbox. The problem seems to be that the clutch fork doesn't move enough to allow me to move the slave cylinder in place so I can bolt it to to my gearbox. Not sure what else I can do to try and fit it. Anyone have any ideas that would be great. Hopefully I won't have to remove the gearbox as I don't have the time or the motivation to be removing it... Quote Link to post Share on other sites
yaristurbo Posted February 16, 2014 Share Posted February 16, 2014 The Slave rod needs to be forced in while you but the bolts in can be tricky Quote Link to post Share on other sites
Idrees Posted February 16, 2014 Share Posted February 16, 2014 I'll try it tomorrow Quote Link to post Share on other sites
dangeestarlet Posted February 16, 2014 Share Posted February 16, 2014 Just take the pipe off the slave cylinder and undo bleed nipple and push it right in, I had the same problem and just bleed the clutch again Quote Link to post Share on other sites
Aamir Posted February 16, 2014 Author Share Posted February 16, 2014 The Slave rod needs to be forced in while you but the bolts in can be trickyI have tried that but I'll have another go at it I'll try it tomorrow Thank you Quote Link to post Share on other sites
Aamir Posted February 16, 2014 Author Share Posted February 16, 2014 Just take the pipe off the slave cylinder and undo bleed nipple and push it right in, I had the same problem and just bleed the clutch againIve removed the pipe of the slave cylinder and undone the bleed nipple to allow all the fluid out.. I will have another go at it today Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.