loz180691 Posted April 1, 2014 Share Posted April 1, 2014 I've just rebuild my cylinder head on my glanza. I had a crack test valves re seated head skim and re shimmedI had new valve stem seals put in at wellI rebuild it back up and tyres to fire it up the car would not start easy and got it going a few times the oil went milky straight the way! I realised that I had put the hoses on the throttle bodie back to front feeding water directly into the oil :@I sorted that problem and then changed the oil the car fired bang on so I ran the car up and then engine flushed it and put some more oil in.Now when car is warm ish I get a slight bit on smoke white/blue ish could this be all the crap still passing through the engine and through the exhaust? Quote Link to post Share on other sites
Chris_GlanzaV98 Posted April 1, 2014 Share Posted April 1, 2014 white is water and blue is burning oil mate, re-check the stem seals most likely they arnt fitted properly Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.