burt Posted January 27, 2015 Share Posted January 27, 2015 Installing sr doors onto a na (the way I did it) both models were 1997 Unbolt wings from the car Unbolt doorsDrill hole in A pillar for cable to pass through There is a recessed section on the pillar so very obvious (should really paint the edge)Line up new door and bolt onPush loom plug through the new hole and plug into the matching plug in car behind the kick panelBolt wings back onMAKING THE CENTRAL LOCKING WORK. Remove trim panel/speaker from under steering wheel Locate this plug/fuse the white one on the right Add this relay to itCheck central locking works MAKING THE WINDOWS WORK.With the dials out find this orange plug Fit this module Install here, if you have taken the module from a sr it will probably have the bracket attached Check windows work before putting dials back in. The whole job was straight forward and was finished in a day.If you are switching doors like I did, don't forget to change the locks over from the old doors or you will have 2 keys. I also put a remote central locking kit at the same time Burt Quote Link to post Share on other sites
epnineone Posted January 27, 2015 Share Posted January 27, 2015 where'd you get the relay and the window control module, would they be in sr starlets or glanzas? Quote Link to post Share on other sites
burt Posted January 27, 2015 Author Share Posted January 27, 2015 Mine all came out of the sr I scrapped Quote Link to post Share on other sites
Pete_A Posted January 29, 2017 Share Posted January 29, 2017 Thread from the dead! I've now got power windows but bo central locking, is there a fuse for it? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.