epnineone

Anyone know what this pipe is for, I noticed something leaking after I shut off the car today and found this small snapped pipe with a hose on it that attaches to the bottom side of the throttle body on my n/a ep91 any one know where it leads to and what it's for? Edit: I have a picture on my phone but unsure of how to attach it to this thread ?

4 speed went straight in no problems it's running again.. there is a faster launch woth the 4 speed but is slower on the high end.. acceleration has increased though

Well the diff is blown and it's needs a new box, got the four speed for free so it's going in for the time being, I'll most likely be going 4efet in which case if the 4 speed doesn't hold up ill get a 4efte box

Hubs shouldn't be a problem then should they?

Mounts are definitely the same, I checked this morning. . was talking to a mechanic friend and he said that I'll need different hubs as the splines are different on the 1 litre shafts, anyone have any info on this? Thanks!

I'll get a pic of the mounts in the morning, the rear one looked similar but I'm not too sure of the front mount

Hey guys, so the other day I attempted a burnout in my n/a ep91 starlet and blew the diff and snapped the rear gearbox mount, it couldn't handle all 74bhp from the irish model 😂 so I was able to pick up a 4 speed box from a 1.0 litre ep82 starlet for free and was wondering will it fit to the 4efe block and are the mounts different (I know I need the 1.0 litre driveshatfs) thanks for any info on this

where'd you get the relay and the window control module, would they be in sr starlets or glanzas?

Just saw your post there, good guide for anyone wondering how to do this http://www.ukstarletowners.com/topic/90102-electric-window-and-central-locking-upgrade/

Thanks burt would be great if you could post a link! Is it on the ukso forum?

So my n/a starlet has manual windows as standard but has a plug in the loom for electric windows. I've bought 2 Glanza S doors with door cards to replace my old ones but when I plug in the door to my loom i get no activity at all, not even a relay clicking or a motor whining. Has anyone made a guide on how to do this? Do I need to install a relay or wire in the doors completely from scratch? (I know I need to drill a hole for the window loom and that the glanza electric mirror wont work)

Don't go cutting springs mate, leads to regret trust me

Thanks for the warm welcome lads, build thread will be started soon hopefully

Hi all! Been lurking on here for a while now, on and off when I need help with wiring and just general ideas on modifications. I decided to make my account so I could share my journey throughout the build of my irish ep91 starlet. I've already a fair bit done but I'll try to backtrack my steps and get as much detail in for anyone who's interested. Anyway, enough talk, glad i finally joined and loving being a ukso member already!