TuckerEP91

Tried that already mate. I've just been around checking for leaks for the last hour to no success. Changed all copper washers on flexi hoses. Even put some thread tape on the nipples. If i pump the pedal repeatedly it will go hard But if I take my foot off after pumping then go Back to the pedal it will go spongey and will push straight to the floor after only Leaving it for literally 5 secs. Cheers for replys. Hope we can get to the bottom of this Didn't imagine I'd be bleeding my brakes on my bday lol

Does anyone no if the servo is the same on a Standard ep91 as it is on the Glanza?? Cheers

????? help ;-/

already replaced the master cylinder mate. if the servo was shot then surely the pedal would be rock solid?? cheers

hi mate cheers for your reply started from furthest away from master cylinder. so nsr then osr, nsf then osf. ive tried to pump the pedal to build pressure then release the nipple but struggle to get any pedal to do so. cannot find any leaks or air pulling out what little hair i have left, lol must be done for japfest.

Hi in need of help lol Recently removed and painted all callipers. wish i never. refitted and tried to bleed through. plenty of fluid no air. no success with pedal. tried pressure bleeder. still no success. 10 litres of fluid later....... changed all copper washers on flexi hoses, and fitted new brake bleed nipples. no success....... bought another master cylinder as had no pedal even if hoses clamped. fitted master cylinder still no success.......... bled abs pump. 15 litres of brake fluid later........ still no brake pedal. getting angry!!!! pedal will go slightly stiffer if pumped repeatedly but when left for 5 seconds goes straight back to floor. dont know where to go with this. getting annoyed. would appreciate any help? known problems maybe with glanza brake bleeding?? as hoping to go to japfest cheers Andrew

Hi mate how much for Passenger rear calliper?? Need one ASAP Cheers Andrew

NSR Calliper for 96 Glanza Need before frid. Otherwise missing japfest Cheers

Thanks for reply. Got one on the way now mate Should be with me by Tuesday. Cheers Anyway

Have u got a couple pictures of the master cylinder mate? Anybody else??? Need on ASAP. Help!

Just tried them mate. Not listed with them Cheers anyway

After a brake master cylinder for my 96 Ep91. car has abs if they differ Cheers Andrew

Have u still for this mate?? Il take it

ct9 manifold wanted max spend of abt 150 quid. anyone got anything that isnt cracked?? need to get one sorted before japfest. cheers Andrew

Looking for a ct9 mild steel manifold anyone got anything? Cheers Andrew

Haha. seem to spend all my spare time of the forum mate. Wer u see me too? Work in Truro wbu? Trying to get hold of a fmic kit, not too sure what to go for tho?

Cheers mate. Would like a brand new kit but got a budget of 200 max really Thanks Andrew

FMIC Kit wanted. Anybody got anything? Cheers

Wanted hdi fmic with hard piping to suit ct9 Cheers Andrew