drako

Hi, Need a dump valve as my Baileys dump valve seems to be faulty and dumping slightly on half throttle. Dont really want to spend much on a second hand one. Also need a idle control valve as the diaphragm in mine has broke and a distributor cap and rotor arm. All need to be in good working order. Not too bothered if they have a few wear and tear marks Cheers

Sold to Brendonware

Will let you know mate.

Taken deposit on turbo and mani

Ill have to get a price on postage mate.

Bump Not dropping on price and price doesn't include postage.

Bump

Still got it yes.. PM me for details.

I dont actually need the clocks guys, just the front surround part which goes on the dash and around the clocks.

Abergavenny, South Wales mate. Mikey if you can hold one till fri then ill definitely have it off you. What colour is it?

Just bought a lovely white Ep91 Glanza which needs a bit of tarting up Heres a list of everything i need; *Purple D2 wheel nuts *Front grille for early style bumper *Duck tail lower spoiler *Green cotton or similar induction filter *Ht leads, preferably magnecor ones *Dump valve *intercooler kit *Clocks/cluster surround I've got plenty of things to swap for if anyone is interested; *Fully forged engine done by Monster Motor Sport. Engine needs crank shells and crank regrinding as bottom end went on me. All head in tact and will come with inlet and exhaust manifold, injectors w/rail, sump, rocker cover and other small things. *TD04 Turbo with Wepr Evo manifold and adjustable actuator. *Original steering wheel with center airbag. *A pillar double boost gauge pods. *Oil pressure gauge *HKS fuel cut defender *Starlet rear anti roll bar *EPR Rear tow eye in anodized red Will get photos on request. Cheers Nick

Well its my mate Harry Jones's old Starlet which he has had from import but never really used it. You will get to see alot more of it on here when i sort things out on it

Yer it did have a mesh grill but looked quite tacky so I ripped it out! Just gota find another :/

Well its got a Zisco stainless mani running stock ct9, hks adjustable actuator,front mount, A/C removed, relocated air filter, sparco bucket and a few other things. Plans are strip the back seats out, get another bucket for passenger, harnesses, hybrid turbo and a nice varis kit maybe

I just want rid to be honest. Have no intentions of doing a Td04 set up again and plus Cluttering up the garage haha!

Just bought this white Glanza 1998 which replaced my moonstone blue one Gave her a good polish over the weekend and got to say its a new vehicle compared to how it did look..dull and stinking!! http://s150.photobucket.com/user/nick_toptodler/media/IMG_0728.jpg.html'> http://s150.photobucket.com/user/nick_toptodler/media/IMG_0736.jpg.html'> http://s150.photobucket.com/user/nick_toptodler/media/IMG_0709.jpg.html'> http://s150.photobucket.com/user/nick_toptodler/media/IMG_0710.jpg.html'>

Item For Sale: Td04 turbo set up with stainless manifold. Make of manifold unknown unfortunately but doesnt look cheap. Also has adjustable actuator all set up, water pipes, braided oil feed and return pipes all on and in tact. Item Condition & Description: Came off my Glanza but the bottom end went in it so im now running a stock ct9 turbo as i didnt wana put too much strain on the engine again. Hardly any play in the shaft and like i said came off running car. Manifold has got a slight crack, or at least looks like one on part of the weld but can easily be welded with plenty of accessibility.. its not major and wasnt blowing or anything, just being honest. Price: £100 Pictures: http://s150.photobucket.com/user/nick_toptodler/media/IMG_0719.jpg.html'> http://s150.photobucket.com/user/nick_toptodler/media/IMG_0717.jpg.html'> Payment & Shipping Details: Would rather collection only or buyer could arrange courier.

Got a standard Ct9 manifold. Been welded previously but done very tidy. £30.

Got one TD04 turbo in very good condition with no play in the shaft at all. Came off my mates glanza which the bottom end went in. Also got attached to it is a stainless zisco manifold. PM an offer?

Item For Sale: * Got complete front hubs and brake set up off a Glanza (EP91). Comes with both N/S and O/S Hubs w/bearings, calipers and carriers, Abs sensors, bottom ball joints, good pads and half worn discs. Note: O/S bearing slightly noisy but not resulting in any play. * Rear optional extra 3 point strut brace. Quite rare to find if im correct. * HKS Fuel cut defender. No wiring diagram but can be found online. *Rear EPR Anodized red tow eye. Used for 2 weeks and then took off because it didn't suit the set up on my Glanza. Comes with the sandwich plate and bolts. Item Condition & Description: All items used but in good clean working order. Rear strut brace got few minor scratches but can be easily touched up or resprayed. O/S/F wheel bearing slightly noisy. Price: * Hubs and brakes set up complete £80. Individual sale £50 a side. * Rear strut brace £30 * HKS FCD £25 * EPR Tow eye £20 Pictures: Payment & Shipping Details: Pick up only or arrange own courier. Located in Abergavenny, South Wales. Will provide address and details on request. Cheers Nick

Looking for a moonstone blue bonnet for a Glanza? preferably in good condition with no dents. Currently have a black one in very good condition so will swap for moonstone blue one or buy. Cheers

Ill be there if its not on a Saturday night as im on call I know this is'nt the wanted section but does anyone have a driveshaft for the N/S? Quite desperate! Cheers

...Living in Abergavenny, South Wales and now on my second Glanza Love the little things and regretted selling my first one! Biggest mistake i ever made with cars!!!! Anyone on here from the local area who is also a lonely Starlet owner?? haha! Anyway here she is; http://s150.photobucket.com/user/nick_toptodler/media/Glanza-Grids.jpg.html'> http://s150.photobucket.com/user/nick_toptodler/media/IMG_0656.jpg.html'> Didnt quite look like this when i bought it a few months ago. Spent almost 1k to get her up to scratch but it was worth it! Nick