ep70

Sorry for not updating in a while but alot has being done since my last update bought this donor 1.3 5 speed corolla in mayo a month ago or that, have to admit it was no pretty sight, sills, wing, pillars all rusted along with all the other usual places.. however there was a healthy 2E engine When i had the engine out i done a few jobs on it including timing belt, water pump, valve stem oil seals, oil pump seal, cam shaft seal, bottom end seal, nd also gave it a full service, i also put the 1E sump on it as it is shallower and would be less inclined to bottom out After a week of evenings and a saturday i had the 1E out and the 2E back on the road put the 1.3 rad in the following week as my 1 litre one was f*cked Still have to do brakes and few finishing touches but il keep ye updated Heres a little pic from modified live 2014 in mondello by the way ;)

Lookin for a 1.3 2E engine and box, must be running 100%, no scrap or oil burners, can buy complete car if preferred. Im in leitrim so looking for one in ireland, preferably in the west or midlands.

got superlites 13x7.5s with 155/55 strched tyres. also put 10mm spacers on the front wheels: hope ye like it

Made another attempt at DIY and made a strutbrace

Starlet_cab it was off a seat ibiza,i took it off it at de scrapyard

just wondering does the 91,93 model starlet have a full ecu. i want a 1.3 engine for my boxy but its hard to get a donor 1.3 ep70. if the 91,93 model are wired similar as the boxys it would be an awful lot easier. can anyone give me some info?

i tink it was a 96 ibiza whatever tat is.. know nothing about them to be honest. ye thats what i was thinkin daniel

just tink its a standard ibiza splitter, not sure, all i no is it was wel worth €5 i had to cut it in a few places to make it fit but the bends were all pretty much the same. i duno daniel, i was tinkin of tintin my back 3 windows mayb? what do you tink?

Bought this boxy a while ago but never got round to putting up some pics. When i bought it it alredy had coilovers, gti seats and 15" speedlines. Its still a working project but so il keep ye updated. So when i bought it was all faded from liein up so firstly i gave it a good polish and this is how it turned out: Firstly i got a splitter of a seat ibiza (seen it at a scrapyard and got it for a 5er) then lowered it another 25mm: Done few small bits then like smoked my back lights and put yellow wrap on my parks. Also got a set of pressed jap plates: Chanced making my own spoiler out of 3mm aluminium and i dont tink it came out bad if i say so myself This is how it stands now: Thanks for looking lads and hope ye all like it