Wardy1988

Don't know mate got no clue what it's worth wanted to find some more info first

Don't know if this is the right place to post but I found one of these in my ep91 and after looking on google found this is part of a remote start system I think. Question is has anyone got/used one and would it be worth anything selling as I have never seen one before and have no interest in using it will put pics up of it shortly

Glanza loom n/a stalks can you cut and swap the connectors or is that not possible?

Pm'd

As in title as close to Kent as possible

Right ok then il let my guy at the garage know, he may have already chopped the n/a loom to peaces so il have to see what he says. Thanks for your help and being patient hopefully at some point il have a car back out of all this Oh and also does that mean I should use the gt ecu?

I have got that far but the in car plugs and also the fusebox plugs are different how do I get round it? Are the colours of the wires the same? Do I need all of them?

How do I convert the fuse boxes over its a 91 box but 82 plug

Still doesn't make a lot of sense to me as a lot of things have been cut by the garage the car was at as soon as I get the engine loom in I can have a look and get it sorted I hope

As soon as I get on to a pc I will its all the stuff that comes from the fusebox, been offered a gt loom but the problem is it doesn't seem to have the 16pin ecu connector onli the 26 pin and also could i use a 91 fusebox

Ok so I'm looking for a gt loom now will it still work with the four connectors I have hidden behind the stereo unit or will i have to extend it?

Looks like it's for a gt anyone have one?

Right ok well I know amongst the bits I have there's a gt ecu and part of an engine wiring loom but I would still have no clue where to start however it may make the sparks job easier if its there will let you know what happens

From what I have been told (not good with electrics) it's a glanza engine loom and ecu but an ep82 engine. Bought it all from a guy who said just put it all in and it will work but of course it don't oh and as for dash loom it's just a standard ep91 as far as I know so just gonna get an auto spark to sort it cba with the hassle now

It's a 91 glanza loom with a 91 ecu but I have 2 16 pin connection blocks instead of 1 16 pin and 1 12 so I need to know which block to cut so I can wire up the 12 pin correctly in the hope it will spark before I have to get an auto electrician in. I have the diagrams but would prefer a picture with a description of which wires do what and where they should go. Make sense?

I have looked through google loads of times no pictures of the 12 pin connection

Would be handy if someone could take a pic of an ep91 ecu with there 16 and 12 pin plugs with cable colours so I can check they are all round the right way. Thanks

Ok adding to this on my loom I have a 26pin plug and 2 16 pin plugs what's going on? :S

Based in kent as quick and cheap as possible urgently needed please

Think i have worked the problem out i have the 3rd 12pin connector that carries the switched battery power and various other bits and its not connected so now i need an ep91 ecu to try it

Did you have any luck with this mate im trying the same

Also to add its a 91 glanza loom

Changed the thread after trying more stuff basically I had 2 16 pin connections for the ecu and one needs to go. I need a picture or description of colour for both the 12 and 16 pin connections to make sure there wired up the right way. Thanks