Wardy1988
-
Content Count
56 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by Wardy1988
-
Don't know mate got no clue what it's worth wanted to find some more info first
-
-
-
Don't know if this is the right place to post but I found one of these in my ep91 and after looking on google found this is part of a remote start system I think. Question is has anyone got/used one and would it be worth anything selling as I have never seen one before and have no interest in using it will put pics up of it shortly
-
Glanza loom n/a stalks can you cut and swap the connectors or is that not possible?
-
Pm'd
-
As in title as close to Kent as possible
-
Right ok then il let my guy at the garage know, he may have already chopped the n/a loom to peaces so il have to see what he says. Thanks for your help and being patient hopefully at some point il have a car back out of all this Oh and also does that mean I should use the gt ecu?
-
I have got that far but the in car plugs and also the fusebox plugs are different how do I get round it? Are the colours of the wires the same? Do I need all of them?
-
How do I convert the fuse boxes over its a 91 box but 82 plug
-
Still doesn't make a lot of sense to me as a lot of things have been cut by the garage the car was at as soon as I get the engine loom in I can have a look and get it sorted I hope
-
As soon as I get on to a pc I will its all the stuff that comes from the fusebox, been offered a gt loom but the problem is it doesn't seem to have the 16pin ecu connector onli the 26 pin and also could i use a 91 fusebox
-
Ok so I'm looking for a gt loom now will it still work with the four connectors I have hidden behind the stereo unit or will i have to extend it?
-
Looks like it's for a gt anyone have one?
-
Right ok well I know amongst the bits I have there's a gt ecu and part of an engine wiring loom but I would still have no clue where to start however it may make the sparks job easier if its there will let you know what happens
-
From what I have been told (not good with electrics) it's a glanza engine loom and ecu but an ep82 engine. Bought it all from a guy who said just put it all in and it will work but of course it don't oh and as for dash loom it's just a standard ep91 as far as I know so just gonna get an auto spark to sort it cba with the hassle now
-
It's a 91 glanza loom with a 91 ecu but I have 2 16 pin connection blocks instead of 1 16 pin and 1 12 so I need to know which block to cut so I can wire up the 12 pin correctly in the hope it will spark before I have to get an auto electrician in. I have the diagrams but would prefer a picture with a description of which wires do what and where they should go. Make sense?
-
I have looked through google loads of times no pictures of the 12 pin connection
-
Would be handy if someone could take a pic of an ep91 ecu with there 16 and 12 pin plugs with cable colours so I can check they are all round the right way. Thanks
-
Ok adding to this on my loom I have a 26pin plug and 2 16 pin plugs what's going on? :S
-
Based in kent as quick and cheap as possible urgently needed please
-
Think i have worked the problem out i have the 3rd 12pin connector that carries the switched battery power and various other bits and its not connected so now i need an ep91 ecu to try it
-
Did you have any luck with this mate im trying the same
-
Also to add its a 91 glanza loom
-
Changed the thread after trying more stuff basically I had 2 16 pin connections for the ecu and one needs to go. I need a picture or description of colour for both the 12 and 16 pin connections to make sure there wired up the right way. Thanks
