Neo95

As titled, Im after a good condition/spec fully forged engine.

Cash waiting.

Location not an issus as long as in UK.

Thanks in advanced Neil.

SOLD! Please lock!

Bump. May break if any ones intrested.

Price drop!

Bump it up!

Where you located?

Coventry.

What cams and crank are in it ?

Sorry for the late reply, Standard cams and the crank was reground when built.

BUMP! Open to all offers need this gone now!

SOLD!

Year: 1996
Model: Glanza V
MOT: 27th May 2017
Description:

1996 Toyota Starlet Glanza V for sale. Time has come to say bye. This is a fully forged Glanza V, well looked after built to a very high standard. Running healthy at 283.5bhp an has all the supporting mod to go with.

The car has had a full respray since then it has gained a couple of nocks and bangs since. i.e car park dink in drives quarter not huge but noticable. as seen in the pictures the boot has couple of dents in aswell as the bumper has a paint crack from a car running into the back of me no major damage on structural stuff was only after pulling off from a set of lights.

Since engine was forged it has covered around 8500 miles, I have serviced the engine every 1000 to 1500 miles. Car its self has covered 145250km.

All this car needs to become a great little pocket rocket is a built gearbox.

Number Plate NOT included in sale. Will be back on original plate!

Current Spec:

TM Developments Fully Forged Race Engine

75mm Wossner forged pistons

PEC forged conrods

1.9mm Athena metal head gasket

Fully stripped and thoroughly chemically cleaned

Block rebored, crosshatch honed

Cylinder head stripped and cleaned, valves re seated, new valve stem seals

Cruise valve springs

Head ported

New Head Bolts

New Toyota oil pump

New water pump

New Power Enterprise Cam belt

New tensioner kit

New oil sender switch

New thermostat

All new gaskets and oil seals

TM Developments rocker cover

NGK Iridium Spark Plugs (Heat Range 7).

Zisco K26 Big Power Turbo Kit

Tuning Developments 255LPH fuel pump

Sard FPR

Zisco fuel rail

Denso 430cc Injectors

ID Workz half sized rad

Roose coolant pipes

Full Greddy E-Managment Blue

GFB G Forces electronic boost controller

Blitz turbo timer

Full map/dyno at Tuning Developments

JPerformance FMIC with custom boost pipes

Full 2,75inch Stainless steel heat wrapped exhaust

D1 Spec coilovers (Rears need a re-build as leaking oil)

TRD Quickshift

Brand new TurnOne dished steering wheel

Sparco REV Plus bucket seat (FIA in date)

Flocked dash

15” Enki wheels

Toyo proxes all round

Standard “Uprated” front dices and pads.

Stripped rear

And all the stuffed I’ve missed!

Currently the only bad bits are that the coilovers are in need of replacing or rebuilding this has also caused the front tracing to become out making the front tyres castled. Aswell as having a “standard” gearbox.

Any question, things that I have missed or more pictures don’t hesitate to get in touch.

07794700352 Please text first as work. Open to all sensible offers!

Price: £5600 ONO

Contact Details: 07794700352 Please text first as work. Open to all sensible offers!

Hi people. I need same help my efi fuse keeps blowing anyone had this problem before or have any ideas what this could be?

Cheers Neil.

So ... As titled really, I after a set of good brand good condition coilovers for my EP91.

Cash waiting!

Cheers Neil.

As titled. Anywhere in or near the midlands.

Cheers Neil.

Thats ace. Cheers thanks alot lad!

If you've got time between now an Rockingham to have a silencer fitted, then do so.

A proper silencer not something you stick in the end of the exhaust

The in tip silencers can also effect your map too!

So be careful.

Oh right where can i grab one lf these from an this will not effect the performance?

You can get a screw in silencer for your backbox. Will require a small hole for it

Hi, I am currently running 285bhp with a 2.75inch strait pipe, Im booked on at rockingham an there sound limit is 98db.

My question is I'm guessing this ig going to be over the limit an what is the best/quickest way of silencing it down?

Thanks Neil

Hi,

Just a couple of questions are the front wings on a normal starlet the same as a EP91 import? Will they be a direct fitment? All I can see from pictures is that they have the side indicator in the wing.

Also has anyone had any experience with the ID-WORKZ fibre glass tail gate are they a direct fit or are they a night mare to fit as there fibreglass etc.

Cheers Neil.

As titled I'm after a set of front EP91 wings condition an colour doesn't really matter.

As local to Coventry as possible!

Thanks Neil.

Just the question I was going to as what you do you in the range of replacement discs/pads?

Cheers Neil

Ffs i have so much want for these however what do u use for replacement discs etc

PM Sent.

As titled after a good condition aftermarket LSD'ed gearbox.

Thanks in advance.

Neil

I will let you know cheers

Gloucester,can post

Where about are you buddy?

Got a cheap glanza one here mate

Would it last long an are they a night mare to fit compared to the standerd one.

They are slightly smaller in size but they do still fit and work.

Just a quick question starter motor on my EP91 has gone is a standard starlet starter motor be the same an fit?

Cheers!

http://www.rhdjapan.com/orc-309-single-plate-metal-clutch-kit-toyota.html

Ace, What sort of power will this take any ideas?