TurboTD04

Would you sell a rocker cover off one of the engines on its own?

Thanks

Still got the cam cover?

Interested in the rear diff also

ye didn't see they were auto before and nice wasn't aware that they would fit as well will keep an eye out, all them ones you listed before would they also only need the bellhousing made up or are some of them a bit more involved?

are autos though

http://www.j-spec.com.au/auction.php?type=all&make=TOYOTA&model=STARLET&chassis%5B%5D=EP95&year1=&year2=&trans=

That link should work, three ep95 up tomorrow

Ye will spend a bit of time looking through here

And there are still quite a few left in japan have been looking at jap auction sites and theres a steady supply of them going through, there is 4 due up for auction tomorrow one starting at £75!!!!!! and you know they will go ridiculously cheap just getting them/the bits back ha may have to combine a trip out to japan with that one day sure a few people on here would be interested lol

And if he gets back to you and has a few going wouldnt mind you dropping me a message lol

Ok i will continue scrolling through the (very big) internet haha thank you for the help!

Also any advice or good company's you know to trying and source parts?

ok so im pretty much limited to the ep*5 diffs then?

And ye its going to be a little pocket rocket! ha just a bit concerned about putting the power down thats why im looking along this route

Have got a 4efte engine in the mini atm and have been emailing around for the ep85 or 95 gearbox and transfer box but as you say i know there a nightmare to get hold of lol.

Drive shaft i will get made up as it will be a different length.

So was just looking for a solution for the rear diff, not sure if it would even be better using a different ratio as it will be on 13inch wheels. i dont completely understand diff ratios but understand that's a variable.

Hello there im working on a project atm that involves a starlet engine but in a classic mini and in the process of trying to source the gearbox/transfer box off an ep85 or 95 but thats a separate problem.

My question is instead of getting a rear diff imported over is there any other more common cars with the same diff ratio? i know the rear diff ratio is 2.277:1.

Thanks

Ended up going with ct9 uprated mani and going to get a ct9 to td04 conversion thing. would of loved to have just gone TD04 mani but really didnt have the space haha

Right recon the options are

Option 1

Wepr ct9 uprated mani

Adaptor from ct9 to td04 with external waste gate

Option 2

Wepr TD04 with external waste gate

Thinking option 2 is a bit more appealing atm as it's one thing if the dimensions are right but option 1 I could choose what angle I want the turbo to be at but need to get a few more bits of info before I make my decision e.g. How much bhp the ct9 uprated mani can take and the dimensions of the TD04 mani

http://www.ukstarletowners.com/topic/32236-rw-developments-ct9-mani-td04-adaptor-kit-pics-now-added/

Take a look at the above from Dean @ RW Development

John

Just had a look through this looks good! could you recommend a good ct9 mani that isnt to pricy?

You should have a look at this build mate.

http://www.toyotagtturbo.com/forums/showthread.php?106239-Project-minza-D

ye have been chatting to this bloke on 16v mini forum whats mani is that hes running?

Nice build

John

Thanks mate can't wait for it to be finished

for the shortes and smallest rout possible your best bet is to use any compact ct9 mani and use an adaptor plate for a td04

Ye I was thinking the ct9 route could then cut the ct9 flange off add a td04 flange in whatever position is best and an external wastegate but didn't no if a ct9 mani would be man enough to take the boost?

ok thanks for the quick reply just got a pm from Sacha so will be having a chat and seeing what we can go and heres the link to my build thread http://www.16vminiclub.com/forums/showthread.php?t=30330

Hello and good morning uk starlet members, got a bit of a strange request here people but as some of you may or may not no i am currently putting a 4efte in a classic mini and i am looking around for a mani atm as you can probs guess it has to be small to fit in. The toyosport looks like the most compact TD04 mani out there (if anyone knows of any others that aren’t stupid prices please let me no) anyway i need a few measurements to see if it will fit before i buy, i have contacted toyosport but as of yet they don’t seem to interested lol

So i need two measurements the first being from the exhaust flange (where the gasket would be) to the outer most pipe (not the td04 flange as this has to be cut off and moved) picture below:

And the second from the same place to the highest pipe

If someone could quickly measure this for me it would be greatly appreciated!!!!!

Many thanks

Second dibs on decat

Hello there people I need a Ct9 flange for a project manifold I'm doing anyone no where to get one?

Thanks

Pm'ed

I'm looking for about 250bhp with possibility of going up to 300bhp in the future and not to bothered about having a little lag I will have a read through this and try and get my head around it lol

Hello I am in need of a radiator upgrade have seen these on eBay what power do you recon they will be able to handle roughly?

http://item.mobileweb.ebay.co.uk/viewitem?itemId=380718240082

Thanks

Ok sweet thank you do have a press at work can use that I do like the idea of playing with fire though haha