carter

many thanks!

only got the 82 one i'm afraid.

ignore the rpm wire, i didn't make the diagram and it's not important. using an ep91 diagram you should be able to find the correct pins

http://dub-se7en.toyotagtturbo.com/useful_...TOYOTA_ECUS.pdf

look for rick lee or driver on here. he make the set up and will mapped the car for you. i had my car done by him very very good mapper.

can pick up a SAFC for £100 easy i was offered one for £70, then just get a fcd and rrfpr, £70-100 for an hours sesh on the rollers...job done.

and it's what £350 for a good used emanage (you could pick one up cheaper i'm sure) then £400 for a full dyno map.

slightly cheaper lol

just thought i had. i have a td04 on my glanza its running 235bhp at the fly and 198 at the wheels and i have not had any problem with the at all and it still on standard interals. the standard internal will take 250bhp all day long but you can push them up to 300mbhp have seen this done. they will take it but they will not lasted very long. 250bhp the max if you use the car all day long and every day. i would say not to go over 1 bar of boost you can push the boost up to 1.3 but i would say stay to 1 or 1.1 bar any more you are asking for troble on standard internals. the gear box i told is good for 350bhp before you have to think of getting any thing done to it. i hope this helps alot of people out. of might had make sure you have the right mods for the horse ower you are going to run.

put it this way wrong mod engine goes bang!!!!

right mods engine will love you.

make sure you service and change your engine oil every 3 to 4 months if you can this will keep the car healthy. i use 10/40.

gear box 75/90

its going to have a mani sorry i never put tht down,

when I've fitted the mods I've chosen i let you guys no when its been RR

cheers

can any one post up the wiring digram for ep91 for the HKS Speed Limit Defencer (SLD) and may be a few pics for the how two. i using a emanage blue and got a hks SLD to take off the speed limit and anyone help me out plz.

can any one pm me about the chatter plz. wantted to know will this damage the turbo doning this ie killing it. as i runing a td04 hybrid with cut back fin and dont want to kill a £££££ turbo.

hay mate i had my original sided sticker redone to the same size and shape. send me a pm and i get that sorted for you.

hi to anyone with a glanza with the original stickers could you please measure the length and height off them and let me know

cheers

if my emange disc copies mate. i send you a copy. pm me your address.

Does anyone have software for the emanage blue they could send me or know where i could download it. Also need to get a cable for it as i want get it all plugged in and check its working before i get it mapped. thanks

Should be able to make it mate if nothin goes wrong with me car

Dunno about the RR gota feeling it aint worth taking on lOl

But you can stik me on

1)Craig_N Glanza S

2)DavidAshton Glanza V

3)Markoos Glanza V

4)Mcleod Ep82

5)Driver Glanza V

6)DavidAshton's mate 106 gti

7)B4d1sy

8)carter (if i am in the country)

9)

10)

11)

12)

13)

14)

15)

just liked to say there is a company out there what does a bolt on kit for them for turboing the n/a's i know because i found the site when i was looking at changing my ct9 for a td04. but there is a kit out there i can remenber off my head they said the bhp figure was a round 140 to the 150bhp. hope that helps a few people.if i find the site again i use post up on here

i know it would be easier to just drop the turbo lump in but its more of a project and the satisfaction of a succesfull job. cheers for the advice and ill let you know how it goes.

look at my car i selling on the starlet selling car bit. because my car is 40mm lowered on 15"

could sombody put a pic up if they have a 40mm drop on 15's just so i can see how it looks before purchasing my springs.

thanks!!

does any one know how much power/BHP you can put though a gt/Glanza V gear box before they need some work in the harding deptment.

i had a gear box sent to me and it said it wight 40.1kg. that might help a few people.

thinking of selling my bady for £4500. but not sure yet i know it worth a bit with the massive spec and the add bonus of bean fully set up. ie dynoed and suspion fully set for the car so its very spot on on the handling and steering. open to offers the. as i said thinking about it but if the right price comes i be selling. of full prossionally repaired. thinking of getting a s2000 or a civic type R. just after a new project to start on.pm and let me know if your intreaed.

no worrie mate. just give us a ring and i let you if people are still there.

Cant make it at that time.

hello there every one. some one pm me and maded a very good point about the time at 6pm. ie its well dark at that time. so i said go for about 2pm then. it in the evening and gives people time to get out of bed and clean there baby too. looking forward to meeting some of you guys.

just a quick one for people i will be bring some bonnet raisers with me to sell for you.i will bring a few colour with me as well.

list of people turning up.

1.carter

2.

3.

4.

5.

6.

7.

8.

9.

10.

etc

ok people the place will be The Stockyard on the 7th of march thinking every one meet there for around 6pm.no sillness plz people well dont wont the police turning up and putting a damper on the evening.

address

The stockyard truckstop,

hellaby lane,

hellaby,

rotherham,

south yorkshire,

s66 8hn

tel for the place. 01709 730083

one bar of boost that was. starting to save for the inturnal to be done i think. but 1st i am looking for a 98 spec black front bumper at the minute.

hi there very one. i thinking of setting up a meet next month if any one intreaded. i was thinking of a truck stop (camp-an-ail) (cant spell) well its a big car park and there is a pub there and a cheap hotel and its just off the m18 juction 1. so very acceable for people. its in rotherham area. if any ones intreasted let me know. and i try and set something up. be nice to finally meet some new starlet owners. well if people are wantting me to set it up it be on a saturday.i will ring the place up and ask the landlord if he cool with it. will post up on here and let people know.

carter

hello there people as i said i was getting the car dyno. the car maded 235 at the fly and 198at the wheels and 194 for torque. but as i changed the exhaust i know the map i had done is out again so it another remap again i know this this of the dyno. it runing a little rich at the top end and pops in the exhuast alot.

got to say that some tided work that you done there.i had that autobann intercooler. not bad at all they are. nice tided boddy work mate. where did you get the z piller brut brace from and how much was it? i after one so if you know any one selling one or any one selling one let me know plz.

good new car all fixed. it at the body shop waitting for me to pick her up. got some bad new not going to beable to get my gold exhaust as there is not enough time to get it done so i have to wait. but i will post up a few pictures of the rapier job.

can many one tell me when the meet is and where it is plz. i off for 5 days next week would like to meet a few new people. can you pm the detail plz then i know if i can get or not. many thanks people!

once i got her fixed again and back on the road i will be going for a power run on the dyno so every one can see what she putting down as she bean mapped. i know roughly whats she doing but i want a dyno print out so i know. i will post up picture of the print out when i get it done. it be done around the 11th fed to 15th of fed not sure on what day yet. but will be done between them dates.