Moose

I one of those purist guy with cars, might have found one mate. Cheers anyway

What you got mate, ideally silver, but has to be one without the indicator hole in it. What's you price. Small scratches and little dents are fine mate getting it repainted anyway.

I posted a while ago about needing some front wings, I need a ns wing, I don't mind what colour. As long as no rust is on it it'll be allright. Cheers

Looking for some after market coil overs, like tein but I would like some bc ones. If you have any for sale could you post pics or pm please. Cheers

Has anyone got the front window wiper mechanism. Just noticed one of the plastic bits where the shaft comes out is snapped causing it to rub on the bonnet. Cheers

Sorry forgot to mention 4efte crank If you've got the pulley that would be great guys, not the balancer pulley the pulley with the E stamped in it. Cheers

Hi guys, need a crankshaft Just got a block, just need a crankshaft so I can start the bottom end rebuild. I will get it cleaned up by a machine shop, so if it's a bit dirty I don't mind. I could do with an unground one as I am getting ACL 0.50 shell bearings so I can grind the crank for a perfect fit. Cheers

Hi guys Looking for a bare 4efte engine block. I don't need anything on it just the block. As long as it's not cracked or warped I'm interested. It will be getting machined so it doesn't have to be really clean or anything. Going to start my forged build soon, but just gathering parts first. Cheers

I have a 1996 glanza, need some new front wings, I don't mind what colour just in decent condition. The ones I have are beyond saving to be honest. I don't mind deep scratches but no major dents or rust. In hoping to get the car resprayed anyway. If anyone has a pair of a01 silver that would be perfect. Cheers

Cheers for the reply guys, thinking about starting the project next summer, when the weather is better. I looked on the race tech website and they look awesome, just need to get through the winter first Cheers

Just a quick one. Has anyone got a reconditioned hybrid ct9 turbo for sale, I'm just fishing at the minute for one. What's the best setup for them? I have a stock ct9 turbo at the minute. I'm planning to start a 200-230hp max build but I want to use a ct9 turbo not a td04 (I know guys who love td04s but I'm just a guy who likes to get the best out of stock-ish parts In not wanting to make crazy power but safe boost on stock internals. In not saying if you have one I'll buy it, just an idea up in the air at the minute. I have to run in the engine first anyway after the recent work. Chee

Just a quick one. Has anyone got a reconditioned hybrid ct9 turbo for sale, I'm just fishing at the minute for one. What's the best setup for them? I have a stock ct9 turbo at the minute. I'm planning to start a 200-230hp max build but I want to use a ct9 turbo not a td04 (I know guys who love td04s but I'm just a guy who likes to get the best out of stock-ish parts In not wanting to make crazy power but safe boost on stock internals. In not saying if you have one I'll buy it, just an idea up in the air at the minute. I have to run in the engine first anyway after the recent work. Cheer

I need to check the ignition timing on my glanza. Is the procedure to put the car it diagnostic mode to: Ignition off Bridge terminal e1 and te1 Ignition on Start car Check timing and adjust And I just remove the bridge when I'm done? Just to clarify Cheers

For stock camshafts 4E-FTE Valve clearance with the engine cold are: Intake 0.17mm - 0.23mm Exhaust 0.27mm - 0.33mm I got this from a manual http://www.toyotagtturbo.com/forums/showthread.php?99425-4efte-engine-timing-and-tork It's at the bottom of the page Hope this helps

Can I use this stuff in my 96 glanza? http://www.halfords.com/motoring/engine-oils-fluids/antifreeze/comma-g30-antifreeze-and-coolant-rm-5l I went into halfords as I need to do a coolant change, I don't like buying halfords make stuff apart from washer fluid. It says on it can be used in most cars but what I was interested in was I can be used in 96 Porsches, as my car is an early glanza I didn't want to put that modern extra long life stuff in it and mess any seals up I was going to get the genuine toyota stuff but can't get it in time. Any help is appreciated

Pm'd

Sorry I forgot to mention I own a 4efte so I need a 4efte head unless a 5efte head fits

Pm'd

Has anybody got a complete cylinder head for sale. Long story but the previous owner of the car put, "Aston Martin" spark plugs in and cross treaded cylinder 4.

hi guys just bought a 96 glanza, love it its a bit of a rescue/restoration, been sitting for a while with no real maintenance, just cleaning and stripping the rear out when i noticed that some "attempt" at wiring, basicly hacked and looks like crap, ive looked on the mot and it has a reson for failure on its last as both registration plate lights not working, this has been rectified, i think this is what someone has done to get them working but it looks a real mess and bodge, just want to get it done right. the previous owner mentioned the rear bar light on the spoiler is no

Has anyone got a genuine greddy type s bov for sale.