Monkey

Not sure if this is possible but can anyone change the colour of the car in this photo to the same (or close) as mine. Either that or cut and paste the reflet cluster onto my (old) photo, it's the only one I have at a similar angle. Mine is this colour

David that would be spectacular mate, I just need a run down of wiring colours in your connectors. Idrees had a couple of different coloured wires in his SR loom otherwise I would just make mine identical and it should work. This had been doing my fruit for weeks now.

Update: All the ICE stuff is now in place and wired up, I just need to make the enclosure for the sub. Sounds 100% better already, even with the sub just sat there in the boot. I've actually got something other than tinny treble finally I removed the little running man from the bootlid and the sticker from the passenger door. Had to go out then so the right one is still on, will do that tomorrow, does look much cleaner without. I'll do the bump strips at the same time. Do you guys use anything specific for getting the glue off after? Can't wait to get the spoiler and cupra lip on and

This is where the sub is going to live Doesn't take up much room, I know it will stick out a bit once it's enclosed but still happy with the placement and leaves me with most of my bootspace.

I think that the 2 line import style plates look much better on the starlet, what dimensions should I be getting? Thanks Chris

rrmonkey@hotmail.co.uk

OK, after spending a few hours with my mate Gadget (check out the time of this post), the ICE install is finalised...and begun 6x9s in parcel shelf - Check! Sub will be mounted in custom made MDF box towards the rear and the left of the boot angled slightly upwards. I do use my boot, so don't wanna lose too much space or flexibility by sticking it in the middle. The amp will be mounted to the back of the left rear seat. Amp power lead runs down the right side of the car or up the middle away from the fuel tank right? Channels 1 & 2 (L & R) running with HPF switch on Full int

Cheers mate, so you reckon £50 was ok? Er...no...not really. I have a mate called Gadget who knows a lot more about this ICE stuff than I do, just rang him and he said he'll sort it for me. Apparently all I need is some long RCA leads to run down the car from the headunit to the boot. He reckons I've got everything else I need.

Just found this sub write-up: Nothing wrong with your sound - if you've got Pioneer amps and subs. Bass that hits you to the bone, and power to rock the whole street. Massive power rumbles out of the Pioneer's amps. Pioneer subs will take your sound around the block. Loaded with technology for increased power handling and accurate sound, your car will knock out any contenders. Discover new extremes of power and bass and get way, way down.Monster sound can come in small packages. The 10" TS-W253F Free-Air Component subwoofer is 4-ohm rated and handles 400 Watts max. music power. It features on

Pic heavy update Dropped off my spoiler to be painted today, will get it back in the week and be fitting it next weekend. Also called round to see a mate and mentioned that I was after a decent sound set up in the car. Walked away £50 lighter with a Maystar MX455 Amp, Pioneer 6x9s and 10" Pioneer Sub in MDF board and a wiring loom to hook it all up. He's had them lying around for a while and was about to ebay them. It's fairly old kit but can't be grumbled at for 50 dabs I reckon, any opinions? Here's some photos: MDF board with 6x9s and sub mounted Underside Sub 6x9s Maystar MX

They do fit straight in and the connectors are the same but you have to do lots of pin swaps and I haven't managed to get the tacho working yet.

After lengthy discussions tonight, it looks like I'll be going for an Alpine CDA-9855R head unit and Infinity Kappa 6x9s to start off my ICE project Just need to sell a set of bike leathers to fund it.

Cheers Phil Sportif stickers are coming off the sides and rear and gonna get the rubbin strips painted at the same time as the spoiler. Do they just pull off? Are they held on with clips or just stuck on? I'll have a think about the JBLs and let you know, cheers mate.

Here's my 1997 Starlet Sportif that I bought at the end of September. It belonged to my friends mum who bought it new and has used it only to go to the shops and visit friends locally. It had only done 23,000 miles when I got it ;) When I bought it I knew nothing about Starlets and had no idea there was such a huge modding scene. My only intention was to get some wheels / tyres and a decent head unit and speakers but after spending time on this forum my plans have been added to somewhat. First thing I did was wheels: Then clear lenses and side repeaters: I have also put a K&N p

The locating pins for the Paseo clock faces are different than the SR and the Sportif so I would have to start cutting bits off to make them sit flush ;)

Got some SR clocks from a local breakers last night, swapped all the wires around in the connectors in accordance with the wiring diagram sent to me by David Ashton and Blue Icarian Wings (same diagram) and the damn rev counter still isn't working. I reckon the tacho pulse wire must be faulty which probably means the paseo clocks are fine and I've wasted another £30 ;) The pulse wire seems to start off a really thick orange in the loom and the goes to a thin black one as it enters the connector. When everything is powered up I can feel that the tacho needle is pushing itself down ag

Yeah I checked the part numbers out and made sure i got the right one. I ordered it ages ago and the postage has been really slow though.

I'm absolutely buzzin! Just won a spoiler on ebay. Click here to have a look at the auction. I have no idea what this should have cost but I assume I have done well at that price? Will have to get it sprayed to match the car but i have a few mates that should be able to do that for me quite cheaply. Will get the plastic side strips done at the same time and the arches tidied. I'm guessing this spoiler will look like the one on the CD model right? That's all i wanted, just a little one to smarten up the back end. Picking up my clear indicator lenses an side repeaters tomorrow from local

Hmmmm, I like your thinking, anybody got any SR clocks for sale?

cheers mate, I'm sure that will help me out. If i can't suss it out, I'll get some SR clocks and wire them up like yours, shouldn't have any problems then. I just love the white dials from the paseo Thanks again Idrees Chris ps Idrees rocks! ;)

Can anyone provide me with a photograph of the circuitboard on the back of the SR clocks like the one I took of the paseo clocks in my 'starlet to paseo clocks conversion' thread. I want to trace out the wires on the SR clocks too. Cheers Chris

Update Spotted a contact number on the website and rang them up. The 4" speakers are 4ohm apparently, they cut and pasted from the JBL website which is wrong. The packing says 4ohms in big writing. We'll see what happens when they arrive. Chris

I've emailed the guy I bought them off, he does some 4ohm Infinity speakers so I've asked if I can swap.

Can this be moved into Technical please admins? I really want to know what I should do?

Shit, the more I read, the happier I'm not. Looks like I risk blowing the amp in the stereo if I crank up the volume above half! Bollox, a prime example of doing your research first...doh!