-
Content Count
45 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by BillyM247
-
-
Thanks guys, just made the video on the quick when i was bored! And no its not cracked yet haha, but i did sell the car not long ago as i blew the ring lands on piston 1 , i will get another one though !
-
hey, please give my project a watch on youtube, feel free to like and subscribe for more projects..
Check out my Glanza rebuild on YouTube!>https://www.youtube.com/watch?v=xO_DTjCax8c
-
Was map sensor!
Was map sensor!
-
Thanks man ! Can you swap the brackets round or would I just need to mount it differently/modify the bracket?
-
I have a starlet SR with a gt turbo engine in, get turbo ecu etc and I'm tying to cure a misfire which only happens at 6k revs. I've replaced most things part from map sensor and coil/igniter. Are the map sensors interchangeable from ep82 & ep91?
-
Thanks stu, I'll give that a whirl!
-
So, about a week ago, my car developed a misfire only on boost just after 6k revs, was only in 3rd at that point but now it's in every gear. It's not fuel cut as I have a JAM ecu. It feels exactly like fuel cut, but it's not.
I have cleaned the coil/igniter connectors and made sure it has a nice contact with the Bulk head.
Tried different leads, cleaned rotor arm & dizzy cap even though they and the leads was new a few months ago.
Not tried new plugs get, not done anything with the plugs.
What could this be? My cars spec is bellow if needed
Speed vision gen2 hybrid ct9 @1.2 bar
Jam ecu
Magnacore 8.5 leads
Side exit exhaust
FMIC
Iridium plugs heat range 6 *i think*
Walbro fuel pump
Athena 1.2 metal head gasket
Please note it did this even at .8 bar with standard ecu.
Going to re-check timing tomorrow and replace the plugs hopefully.
Thanks people
-
Already bought one, cheap too to be honest I don't have the money for one fitted by TD
-
They aren't cheaper, if it's £550 for one fitting and mapped at tuning developments and I can't really find time to get there. Might have to though
-
Looking for an EP82 (2pin) plug and play Ecu to fit my starlet SR conversion.
Blitz, jam, sard - not really bothered as long as it's in good condition and you can send me photos.
Message me on 07469956306 or add me on Facebook Billy Ssr Morfitt
Thanks!
-
If only I had the monies
-
Thanks Tom , got a good deal with them in my opinion. And I honestly can't remember addy sorry the old exhaust or the side exit mark?
-
That isn't it russ78
-
Thank you my friend !
-
Cheers jimmy!
-
Thanks dude!
-
Also has cut outs for the back vents under the front windscreen
And for my clock!
-
Check out my thread I also have another about when I first got the car but this is most recent. http://www.ukstarletowners.com/topic/94897-starlet-ep-91-update/#entry1122610
-
I can assure you all that this its not the same matt as those Ebay links, I've looked at pictures on Ebay and they look shocking. I can guarantee you that it's not the ones on Ebay mine is a MUCH MUCH better quality, I'm not saying it's genuine Toyota just I kno it isn't an eBay one. But see for yourself when you order one lol. Thanks For the enquiries anyway
-
Unfortunately I don't have a link anywhere, never actually seen another one highly doubt it's aftermarket as its so well made and the shape is specifically for the starlet dash. But i may be wrong
-
It already had a hole in it mate but you can't tell when the boost gauge is off as it's not a hole its like an X shape cut!
-
So jack it up put it in gear with both wheels off the floor and they should both spin? Or out of gear? Don't really know much about LSD's :/
-
-
Might sound a silly question but how would I tell if I have an LSD gearbox? Cheers
My Glanza *Saved from the breakers yard*
in EP91 Glanza Progress Blogs
Posted
It was indeed mate, and yes it was CRAIG-SR's car.