Mike-530
-
Posts
108 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Events
Everything posted by Mike-530
-
^
-
After just the drivers side indicator if anyone has one lying around. Dont mind having to buy a pair if the pice is ok.
-
As title states. Had a front end bump the other week. Will be needing other bits like bonnet, off side wing and headlight but thought I'd locate a slam panel first and go from there.
-
Brill cheers man !!
-
Ok cheers lads. Do I torque it down in 3 stages like 20,40,60?
-
This is the second installation of them so dont have the sachet. Thanks.
-
Hi people. Just coming round to putting the head back on the car now. Just wondered what lube i should use on the threads and under the heads of the arp bolts? Also what are the correct torque settings? Thanks
-
Bump
-
Ok cheers boss. I'll get some ordered.
-
Can anyone help as to what this star bit is or where i can get it?
-
Its similar to a torx bit but with more contact points. I have nothing in my socket set that fits.
-
I am nearly ready to remove the head from my car. I noticed the arp head bolts require a specific star like bit. Where can i get this bit from? Any help would be much appreciated!
-
^^
-
Can anyone here recommend a decent engine Reconditioner/machinist in the East Midlands or somewhere fairly close? Going to need a crack test and the head skimming. Thanks
-
Can anyone here recommend a decent engine Reconditioner/machinist in the East Midlands or somewhere fairly close? Going to need a crack test and the head skimming. Thanks
-
^^
-
Cheers boss! Appreciate it.
-
Anyone have one kicking about?
-
As title says. Been after one for a while now but they never seem to pop up. Preferably 205 black but will take any colour as im way over due a full respray lol. Thanks in advance. Mike
-
^^
-
The motor has done approximately 10 thousand easy miles from being fully forged at stage 2. I thought it was rather early lol. Hopefully The block hasn't split or something lame like that. How do I check for block failures? Thanks for replys
-
Ok bud, will keep that in mind
-
Purchased a little cheap tester kit from ebay and the blue liquid turned yellow fairly quickly, indicating it failed 😞 . So is there anything i need to know before i set about the strip down? Going to purchase a new gasket, cam belt and get the head checked and skimmed. Anything else i need to be aware of? Thanks
-
As stated. Mine has snapped and is hanging on with a cable tie lol.
-
Haha oh right, didn't know you could do that. I'll look into it and see if thats the case. Thanks
