-
Content Count
189 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by PPSR05
-
-
Cheers bud and it got sent to heaven unfortunately the shell was poor and the engine was worse then I thought, under inspection the cams had chunks taken out of them and wouldn't run right
Did you not break any of it?
Phil.
-
Saw on tues with their fog lights on. Anyone here?
-
All you need to do is copy the Img code and they should work ☺👍🏻
Phil.
-
Can anyone tell me or at least tell me the angles for the exhaust system (n/a) Not really easy trying to measure using a protractor 😂 Any info will be greatly appreciated.
Thanks. Phil.
-
What size is standard it and exhaust on a na starlet
Standard is 1.75" I'm trying to see about getting 2" on my sr.
-
I know it's most likely a stupid question but can someone please tell me what the stabilizing ring does that you get with a boss kit as there is nothing online. Or at least I can't find it.
Thanks. Phil.
-
I know it's probably a stupid question but I can't for the life of me find it online but what is the stabilizing ring for 🙈
Thanks. Phil.
-
Received today. Thank you. Can't wait to get to the point where I can install it all.
Thanks again. Phil.
-
We shipped the first batch of kits yesterday! So they will start to turn up today, tomorrow and thursday most likely!
Oh right ok no problem ☺ thanks for the update 👍🏻
-
Has anyone received their kit yet?
Thanks. Phil.
-
Need to keep an eye on the power steering though (common problem area). New unit will set you back £500 give or take. Unless you just remove it that is.
-
I havent. I have a friend who runs this exact boss with a quick release tho and it works perfect.
The quick release would work with any 6bolt flange boss tho tbh!
Ok thank you. I may have to see about ordering one once I order the engine bay dress up kit.
Thanks. Phil.
-
Do you have a picture of this fitted with the group buy quick release you did by any chance?
Thanks. Phil. -
I keep watching this umming and ahhring about it but sod it put my name down for ep91 UKDM purple please
Thanks. Phil.
-
You sure they didn't put Vaseline on the camera to try make it look better 😂
-
Ep91
in Electronics
There's only two pins in it and there's nothing plugged in to it though
-
Ep91
in Electronics
Does anyone know what the plug next to/ attached to the gear stick is under the trim? It only has two wires in it and I can't find out what the colour wires are.
Thanks. Phil.
-
I mean you can buy the mandrel bends online and would need three 45deg bends and between 1-1.5m of straight pipe I was looking at doing it this way for now as there's no way I can afford like £300 on an exhaust system whereas you could buy the sections for easily less than £100. I mean I know welding would be the best option but like I said it's a project at the moment and it's no where near being on the road.
-
I mean it sounds simple enough even if for now I was to only clamp it with the option of getting it welded and I'm looking at 2" as Ive got an SR and not going turbo so saw that people recomended 2"-2.5"
I appreciate all the replies too by the way.
Thanks. Phil.
-
So basically this is a good way of going about it bar the welding. In other words spending just over £50 on parts rather than spending like £250 on a ready built system. Plus it's only a project anyway it's no where near ready for the road.
-
By the time you've bought all the bits, the clamps, flanges and what not. It would be cheaper to go to a custom place and have one made.
I'm only looking at changing from the cat back and 1 m of 2"stainless tubing online can be bought for around £12 and then about £9-£10 each for the bends and I already have a back box I was just wondering really if anyone's done it this way. It just seems a hell of a lot cheaper then going to a custom fabricator or buying a system online.
-
I was just wondering if anyone has done it that way because it would work out a hell of a lot cheaper. I was looking at 2" stainless steel tubing and just get the seperate parts and clamp them together.
-
Has anyone bought parts seperately and built their own system ie straight pipe bends and rear box and clamped them together all in stainless steel? Any info would be appreciated.
Thanks. Phil.
-
Just wondering if anyone could help me out on how much roughly a pair of n/a headlights would be with no chips cracks of scratches as I will be looking at getting some so was just curious any feedback would be appreciated.
Thanks. Phil.
What do you want from ukso
in Lifestyle General
Posted
Wether it would be to post here or for the sellers maybe possible parts for us n/a owners rather than most stuff available being for turbo owners. Just a thought.
Thanks. Phil.