adamsmith89

What does it read up to?

As above I have a japspeed exhaust looking to swop for a hks silent will put money your way or swap for something quieter

Will be leads

I have Adam can only get it to read 0.00 or ol

but it's racetech that automatically adds £50 and 1000 scene points

Ohhhh so my car is the upper class now

We have new oil lines in stock at £29.95, we can offer Xmas discount too

That's crazy I just paid £71 from racetech for an oil feed pipe

I think the tps is fucked I get 0.00 ohm then if you touch the trottle a little bit you get overlevel.

Will do gazza I'll put my standard one back on

I have a black rear gearbox mount an the vibrations are terrible

Any ideas about the fuel in the vaccum pipe for the fpr?

Cheers guys well I have turned the pressure down to 30psi but I think it's still overfueling slight black smoke and smell of fuel. I'll also check the dome fuse I havent got a cd player to try. Yeah very jerky I have to ease it off

2.4 bar isnt that standard pressure?

Right guys put my freshly built engine in the weekend oil pressure is good etc no major problems just a few I could use some help with

driving slowly in 1st and 2nd I mainly notice it coming off throttle is very harsh.

my rrfpr the clear vacuum line has fuel in it is it fucked? I have turned the fuel down to 36psi as I an running on minimal boost until its mapped. boosts to the first little bar past 0.

cig lighter socket no worky where's the fuse? same with the interior light

Think thats it only done 70 miles in it so far so good until I had a blow out tonight.

Thanks for your help guys all sorted I had it gapped at the machine shop

I have a ring file and feeler gauges I'm just not sure how to work out the sizes I need

Basically just need help to what size I need the rings to be and what size feeler gauge to use

Any help with this please guys

upload images free

online photo sharing

bigger size direct links

http://s18.postimg.org/cap4sm0qx/20151209_001801.jpg

http://s18.postimg.org/4tfxdeb7t/20151209_001815.jpg

Cheers guys,

Here's one for the 5efe it's free if any good to you

http://homepage.ntlworld.com/richard.cargill/Weblink/15L_4_CY.pdf

Perfect mate thank you just about to build my engine back up thats been apart for months so just wanted to look over a few things

What make are yours I have 3 pec rods

Has anyone got a manual for the engine please? Thanks

as above needed asap

Has anyone got any pics of removing the baffle plate? what do you use to rebaffle? how do you secure the plate after?

to be safe I'm just going to buy a new one

as above

yeah