Jump to content

bitesizebeej

Member
  • Posts

    12
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://

Profile Information

  • Location
    Stoke-on-Trent

bitesizebeej's Achievements

Member

Member (2/8)

  1. if anyone can help here it would be much appreciated.... when i start the engine after its been standing for a while it knocks only for a couple of seconds then goes quite, also when i hold the revs around 3000/3500 rpm it also knocks, the obvious answer i assumed would be the big end shells, this all came about after the oil pick-up filter blocked causing the piston rings to get stuck in the pistons, when i stripped the engine one of the shells was slightly scored with no major damage to the crank journal, after replacing rings and shells the engine ran ok for around a month before the engine started to have this knock, i have replaced the shells again although they didnt seem to be worn, and the noise is still there are there any known weaknesses of the 4efe that could be the problem here, other than the crank big end shells obviously, as my next move is to remove the crank for regrind and over sized shells thanks, brad
  2. i think there the same, was looking at a guys and they look the same, as though there same from the same mould, but havent had the airbag off one so i dont no if the centre nut is the same thread/size? im not too bothered about the last couple of mods so if i find a grill ill give you a shout before i have it ;-)
  3. i know what you mean mate, was 50/50 whether put it in but i got it for nothing because the speakers on it dont work lol and to be honest, ther'll break in for the head unit first anyway, plus i dont leave it in dodgy places lol, in it most the time. nd cheers bourkey, theres a couple of little things i want now but other than that i think im going to leave it as it is, a fancy some late spec rear lenses and a remix front grill, thats about it if you no any for sale and wudnt mind the rav4 steering wheel, looks the same step up as mine but in black nd silver? by the way, nice starlets ;-)
  4. page updated above ^^^^^^^^^^^^^^^^^^^^^^
  5. ah, me mate knows him, he works at toyota i think
  6. ah i think i saw you at the festival one night i got it from a scrapy up in rochdale, japs of rochdale, had a starlet sr in 1ao silver same as ours with 4 speedlines and the tte spoiler, a bought the wheels and the bootlid for 100 :-) when i went there was only two there, a white starlet s and the silver sr but it might be worth giving him a ring, i think theyve got a website aswel if you cant find a tte you could always get a cd spoiler, there not quite as big but theres alot more around ill keep me eye out for one anyway ;-)
  7. right, think its time for an update and since ive been gone the starlets give up, after the previous owners life of drivin to london, leaving the car standing for the week while they went uni and then driven back up and round stoke at the weekend the oil had congelied (conjeealed, god knows!?!?) and blocked the oil pick up, the piston rings got stuck round the pistons and after alot of blue smoke i had to strip it down, new engine gaskets and seals kit, big end shells and rings it should be back up and running tomorrow other than that theres... dvd tv sd card touchscreen kitchen sink head unit 600w 4 channel amp jbl 300w 6x9's kenwood 12" 1200w sub marble "boot build" (i say boot build very loosely as its basically a full width sub box and boot floor) corolla inlet manifold (£20, which i thought was prety good) glanza front and rear seats sprayed up rocker cover and calipers sprayed up centre dash and clocks surround next on the list is.... getting rid of the mid box for a bit more noise red reflect rear lens and a starlet remix grill but thats all after a holiday and a phone ill get some pictures when i can as the starlets in my garage in a right mess :-(
  8. sorry lads ive had a rough time of late.......my laptop broke..............and i bumped me starlet........ after paying that off i couldnt afford the laptop bill so i aint bin on for a while........ but basically there hasnt been much happening........ive had a flip-out headunit for christmas and stuck that in and thats about it really........which was a job and a half.....afta fitting it rattle constantly because of the harsh ride so had to make a frame to hold it solid......cnt get it out any more lol but it doesnt rattle any more.......nice big cage around it.......nobodies stealing it for sure going to wire up me speakers, sub and amp later in the week....... could do with the some help on finding the wiring for the rear speakers if any kind people are reading ;) by the way....if anyone has any stuff lying around they dont want tell us and although i cant afford give you any money for them ill pay for postage because im always lookin for free stuff =p will get some pictures up asap........... oh and had put a bigger standard side no. plate on after getting pulled a couple of times..........
  9. i suppose i could give it a try
  10. they arent bein made nemore tho r they....im goin gt a company copy the sr graphics bt in black red nd whyt i fink....or blue silver whyt duno yet....check the price first.....on a budget nd avnt gt me speakers yet... gt the dials frm monkeys mate...a.d. autos in fenton.....i nicked his lst set if ne 1 wnts 2 post on his topic bwt them...nt a fun job tho....3 connectors....39 pins....only 6 stayed where they were....nt fun nd 4 u dub7.....endon near leek
  11. Most motor accessory shops can make these up for you....A2 in burslem, stoke on trent if u live near stoke sell these, they will use standard letterin, font and size but can do anything u want but remember they become show plates only the minute u change them and the shop u bought them from are not to blame if u use them on the road and get pulled.... this is my no plate on my car... my design for the no plate this one is the same but with space for your name this one has no space for your name just the toyota starlet this one is blank and has space for your design on the side and bottom this one is a standard no plate template with space at the side only for your design
  12. pictures below...................... hi, im brad, most people call me beej im 17 and passed my drivin test back in december 07 i av a 99 plate starlet solida which im slowly changing to sr spec, im doing it on a budget as im selling the car once i can afford insurance on a glanza so far -speedlines -tte spoiler -custom back box -removed middle box -lowered -clear indicators -remote central locking with VW style flip-out key -red calipers -red rocker cover -corrolla manifold -glanza front and rear seats, (after standard glanza interior door cards if anyone has any lying around) -white paseo clocks -marble effect sub box and boot floor -12" 1200w kenwood sub -jbl 300w 6x9 (only one as the other had to make way for the tv) -flip out dvd tv sd touchscreen headunit -15" lcd tv with ps2 add me on msn if you want bitesizebeej@hotmail.co.uk
×
×
  • Create New...