BFannon

when i am indicating they are blinking quickly like a bulb has gone but they are all working! but when the hazards go on they blink like normal! will this fail the MOT? if so what can i do to sort it? someone said it might be the wrong wattage bulb? but they all work! Thanks Bill.

well what it is i am using the GT engine wiring loom on the glanza V engine! i have already tranfered all the correct thermostat housing and sensors over! brought bramd mew from toyota! so the injector harness would have been plugged in by my mate! so wanted to double check! also tonight i took my turbo + mani +sard sports cat off, as i has a major leak coming from the mani to tubby gasket! so i renewed it while i was there i thought i would port the wastegate a little to stop the little boost creep i was getting during the colder months! but when i took the tubby off the mani and the sard ca

no one? just need a pic of the injector plugs! so i can see the colours of the wires that enter the injectors! Bill.

anyone got a photo of the injectors? as i am not sure if mine are plugged in the correctl order?as the car aint running properly could this be the problem? also spark plugs are black! any help rep added accordingly

yea i think i did. (take efi fuse out for 15 seconds dont you?) Bill.

been fiddling about with the car tonight and found the oil pressure switch wasnt plugged on! would that have affected the fault code 22? Bill.

its own illuminated switch? the glanza V didnt have a illuminated one just a push button no lights or anything! Bill.

does it need to be on its own switch! or can i wire it in to the fron fog light switch? in order to pass MOT that is? Bill.

any one know anything about this code 22! i have changed the thermostat housing the two sensors in the thermostat housing! ( thermostat sensor and the temp gauge sensor!) i have also checked the knock sensor! anything else i can check as its not running right and it keeps throwing this fault code up and its doing my head in now grr! Bill.

double post!

so is it just to stop any major movement? and to stop and rubbing possible? Bill.

that is what i done to my other glanza (different coillies!) but these D2's dont have anything! will see what i can do as i dont want to fail the MOT for something silly like that! Bill.

Sorry not the hard brake pipes I ment the rubber flexible pipe it has a fixing braket crimped on them? Do thy have to be fixed to pass mot? Bill.

Thanks for quick reply guys will have a ask around thanks! Bill.

That sensor was binned long ago my friend so I need to know what cables to bridge? Unless someone has a sensor they can sell me? I have tried bridging that 4 pin plug in ever way but the fan only works when I turn heating blowers on inside the car( which reallyconfused me lol!) Bill.

Do they need to be fixed? As I have d2 coillies fitted but no where for the standard hoses to be fixed to? Do they need to be fixed to somethin to pass a mot? If they do any sugestions? Bill.

right i have tried all the other guides on how to stop the fan from running to no success! so i have all these plugs and not been able to stop the fan from running! i also carried out a diagnostic test and it came back with 22 wich is coolant temp sensor! open or shorted ciruit! i have been told its to do with the AC removal! they also said to plug the AC sensor back into the 4 pin plug by the battery! this one. but i dont have it. it was binned long ago! also to the front of the car by the cooling rad i have these pair of plugs! one used to do the fan and one the condensor unit but do i ne

how do i need to earth it or what do i need to do then? many thanks Bill.

with the key in the "on" position the temp gauge still goes to the maximum. basicall i have installed a 98 spec engine into a 95 spec quad light, using the old 95spec engine loom. i have installed a 95spec coolant temperature sensor onto a 98spec engine becuase i am using a 95 spec engine wiring loom. the plug now fits but there is nothing that the flat spade bit that is with the coolant temperatures sensor plug will fit to! the main plug fits on perfect but there isnt anywhere to put the spade bit! i have made a temporary earth via a bolt to the tmic frame work and the temp gauge in now goes

really need a quick answer on this lol! facing the car back right hand side of the engine bay you have three pipes! one is fuel in and one is fuel return i think? but what is the third one? the one i am pointing to! any help is a huge thanks Bill.

where does it have the bridgestone 'B' i cant see it or am i being blind! also had another quick look at the rear shocks and if you look it has KYB engraved in the very last (bottom right) of the writing! Bill.

they look identicle to them rear shocks but dont have the dials on them! Bill.

oh right i will give them a good clean then what would people say they worth and does anyone wany better pictures? Bill.

i have just taken these off my car and first thing i noticed was the fronts were different to the back! but all have adjustable shocks! fronts are these! couldnt find any markings on the shocks! but did have adjustable top mounts! and also adjustable shocks and the back are these! and this is all i could find on the shock! any help is appreciated Thanks Bill.

that is the one lol! i am tempted but as with everyone else cash is tight at the moment! Bill.