tomsgtadvance

Yea get everything painted then i am for sticking them on.

My coilovers are d2's with ep95 strut tops and modified bottoms that i bought from wee john. Springs arent lose. And rears fitted. just 40mm springs in the front. Rears lowered slightly more and fronts in. Better pictures soon.

They are not the same but i have a trick up my sleave lol. Pictures up later.

Got myself 2 new headlights out of toyota. And fitted my air filter. And got a set of d2 coilovers.

Got my discs and spigot ring back from being machined. All fitted. 3mm spacer needed for my wheels to clear. But fill them nicely. Load of room . Still need to bleed them but shes moving forwards nicely.

Thanks guys no time line mate just when shes done. Would say she wont be on the road over the winter so we will see.

Discs have been left in for machining so i bulit my new fuel pump in today Old standard pump. New walbro pump in took the original pump out and dismantled the original plug and wired it onto the walbro pump. Big thanks to wee john who wired up my glanza loom to the 4wd fuel pump set up thanks mate . So now the new pump is in i then screwed the covers and the two braces on again and tidyed all the wiring. Also sorted out my oil weep took the turbo set up off and tightened my oil feed while i had it of i decided to heat wrap my de cat and screamer. And fitted again.

Got some parcels yesterday haven't been well so no more progress on the car but will get something done tomorrow. Got astra cdti grooved discs will need to get left in tomorow to be machineed. Walbro pump And a pair of takata harnesses

Not good but aleast you known what the problem is. Yea mine is running but have a slight oil weep from the oil feed to the turbo so need to take the manifold of to tighten it.

Because mine was a 99 like yours and i used a 96 loom the wires in the plugs on the loom drivers foot well and the door loom plugs are slightly different so the drivers window wouldn't work. So i had to change the door loom and the elcectric window motor and switches to 96 ones.

I put the glanza boot on mine had to change the roof loom to for it. And the reason i asked about your loom is does your drivers side electric window work?

Are you putting a glanza boot on her mate and did you use a 96 glanza loom?

Nice one wont be long now then mate till she is running.

No prob will keep an eye on your build to get a look should look well mate .

Nice one any pics of it fitted mate?

Wouldn't know mate just says gold on the labels.

Got a visit from a mate looking a couple of bits today and he brought me down his damaged mk1 fogs and i got these out of them for my gt. So i fitted them and my trd bonnet vent and gave the car a wash. Nest time will need to was it all.

Looking well johnny .

Test fitted the cage today and cut the plastics. Cage isn't bolted in yet but dam it looks good. And because of the elbow on my turbo the 4wd coolant bottle doesn't fit so i made a bracket for the glanza coolant bottle nothing to special but will o the job.

Thanks idrees cant wait till its up and running.

Thanks lads have bought grooved discs and walbro fuel pump so just waiting on them.I had her running before i went so need to get my fan wired up and give her a good run and phil any time your up next antrim give me a shout and call in lad for a chat and a look round pal.

Thanks wouldn't mind the tom's kit on her but have to stop doing bits to her and get my finger out and finish my ep95.

Just a slight update fitted a rsr cat back exhaust to my gt and gave her a clean. couple of pics with my girlfriends corolla. Thanks for looking tom.

Its been a wile with working away and one thing leading to another i have been paying the ep95 any attention. So now i am off for 2 weeks holidays so time to get stuck into this again got my self a few bits. Bought myself a set of st185 celica gt4 single pot calipers and hangers. And when i was standing in the fella shed spotted this wee gem sitting gave her a clean up it was bogging but cleaned up nicely. And these are the app braided front lines of a starlet i was breaking And here's my cusco 4 point for a ep91 in cusco blue. Next up date shouldn't be as long thanks for look

Have a speedo convertor if you still need one.