garioch

enzo ive pm'd you

the 2 paypal disputes were opened yesterday(12/10) the day i had said they would arrive. i thought paypal wouldnt let you open a dispute until after 7 days? obviously im wrong.

once again im sorry about not being on for a couple of days but what a shock i got when i did!

glad its sorted and everyones now happy.

cheers

relevant people have been notified of whats happened. i have put a brief explaination of my for sale thread.

apoligize for not being in touch, hope you understand.

thanks to the other guys for backing me up.

just to let everyone know, parcels were meant to be delivered on tuesday12/10 and are now being delivered on thursday14/10

cheers

this might help the AT ecu and MT ecu have the same ecu pinout/layout

http://homepage.ntlworld.com/dub.se7en/TGTT/ecus_4E-FTE.pdf

You should also see the TPS has 3pins at the ecu, the reason for the 4 at the plug on the AT TPS is an earth plus 3 ecu wires, so the MT only uses 2 of the ecu pins were the AT uses all 3 pins, if ya get me. I just dont know which is used on which

If you want the part number for the AT TPS i can get it you so you can check prices at Toyota.

Hope this helps.

Luke

thanks mate, so what your saying is that the pin is there i would just have to run a wire from the pin to the auto tps, then work out which ones which?

yea mate a part number would be great.

You will need the Auto throttle body as well, they are not interchangeable

Cheers, You manage to get a hold of one? or is it a case of looking around scrappies and hope you get lucky lol

from what ive read and searched for i believe the manual tps has three wires and the auto tps has four?

im running apexi power fc on my glanza, would this be a simple change or would another wire have to be run back to the ecu?

am guessing these auto tps's are like hens teeth?

is there anything else apart from the actual switch i will need.

any help on the matter would be great, if ive missed something out etc. please let me know.

cheers

does anyone have a gearbox lying around that i could get a look at to take measurements for the release bearing area etc. as my box is still on my car. any help would be great. cheers

how much was it mate?

Looking awsome mate!!

Love that front exit who made it??

Bet it sounds savage, so tempted to get one

cheers pal.

local garage (sounds of silence) made it. hes shit hot!

yea sounds good, cant beat the fluttering flame on the overrun

wee update.

fitted new coilovers

new engine mounts

heatwrapped manifold

new 3" system heatwrapped from turbo back :wink:

rear anti roll bar fitted

front anti roll bar and poly bushes fitted

new back discs and pads

that'll do the now.

not seen it in the flesh but i did see the ad on pistonheads, had to double take at the reg lol

well, alot has happened since the last update.

back in feburary it cut out on me as i was slowing down from a wee blast on the mway. and i couldnt get it started again, i took the plugs out to check them and this was what i was greeted with.

so off with the head. which is when my day went from bad to worse.

only one thing to do. start from scratch.

got another bottom end from my mate, bought new rods and pistons, acl bearings, gt2871r, 1.2mm headgasket, 265deg billet cams, uprated valve springs.

engine back in.

evo 9 intercooler fitted.

getting mapped.

not bad eh 252atw 1.2bar

as it stands the now.

that brings me back upto date. now that everythings sorted again i can focus back on the things i wanted to do from the start.

to do:

fit r888's on 15" slipstreams

fit wilwood front brake kit

fit bc racing coilovers

fit whiteline front and rear arb + antilift kit

fit powerflex engine mounts and bottom arm bushes

fit back brakes

get a new exhaust - 3" downpipe and system with no boxes

then its back to ava to get final tweaks and more boost.

enjoy.

gdgd folks, sounds like its going to be a good turnout of ep's

aww got my hopes up when i saw august. my car will be in bits for the first week in august. buuuut if things go smooth as possible i could maybe make it in my freshly converted beast.

whats the plans mate?

ill come to this if you remind me lol

will do mate lol

you read the add right folks!

for the third month in a row Falkirkcruise will be featured by another top you.k mag!

August brings Fast car into the mix, if last month has anything to go by this one can only be bigger and better??

get there early folks!

pics please? did you keep the crash bar or remove it?

cheers

thanks mate, do you know where to get them from?

got a set of samcos for my new rad but they dont look like there going to fit.

should i of bought a different set of hoses or are they just tight.

i bought the set suited for the ep91.

any help would be great. cheers.

lookin good man, big improvement on the stilo aye? lol

where abouts did you get your billet throttle body from?

cracking car mate, really well done.

the car was local to me 2 years back, bought completely stock and built up, 260 odd bhp, previous owner spent alot of cash on it then melted it and td04'd another black jam kitted one... he removed the pas too which was strange and i think its a old wepr td04 kit, was forsale recently too was it not? and had 2 17s at the back and those wheels at the front?

spec of what i know

td04

forged rods and pistons

emanage blue which is already mapped for 1.3 bar?

coilovers

and 2.5" turbo back exhaust which hasnt a cat

anyway... nice glenda anyhow hows the steering?heavy?

yea theres no power steering but its no that bad.

nope, no 15" on it when i bought it.

Spec

td04

forgded pistons and rods

apexi fc controller

tein coilovers

2.5" system with hi flow cat.

prospec 2 boost controller

rc 550cc injectors

was wondering if you could post pics of your engine bay as mine has vac hoses and various pipes going everywhere and i was wondering if they were all nessacery or not.

cheers

want to check timing is ok before i take my head off, are there any marking ive just not found yet?

where would you recommend for hybrid td04's in the uk?

was looking to get a new turbo and saw this.

http://speedvisioncps.com/index.php?main_p...;products_id=87

just wondering if anyone has had dealings with this company and if there delivery was quick etc, turbos are good quality. . .

cheers

falkirk?