EliteMilk

This came in the post today

do it! the hole and bolt holes are already there its easy mate.. i had to get a bit more pipe tho to run it through. tucked it in nicely, extend the wire and plug run across the front crach bar inside the trunking so its tidy

update :]

While i was sorting the water jet pipe i wanted to get my battery relocation cable ran through nice and tidy remove the earth and use it for the rear relocation

Glanza washer bottle came from a member on here :] very happy stelf running pipe work down other side was abit of a shite manage to get it round all tucked in and upto the right side bonnet catch insted of the left leaving to bottle to dry over night will get it mounted in the morning

i love the look the pipe work is top dog! havent heard it yet as i have no engine in atm lol but am sure its going to be cool heres some pics of it JAPKETS

picked up some nismo vents abit back but never got round to fitting them in till now. going to body shop 2 moz so i needed to get them in quick here we go am going to fit them 2 half inc from middle cut out on my TOMS bumper working to a straight line...there is no right or wrong was to do this its up to you but i picked this way Marking up make so slits with a grinder to get the jigsaw in start cutting out ! got 1 sunk in to far now need to trip it up to get it flush as possible used the grinder to knock off abit at a time both cut outs are now done quick gander at what there going to look like as the vent are not for a TOM'S bumper the shape makes them stick out alot so you have to keep taking bits at a time off to get them flush as possible getting there had to see it on i used pink grip to get them stuck in you can wipe off any bits you get on your bumper with some thinners mix up some filler and run it round the edge to flush them in off to the paint shop now to get paninted what do you think silver TOM'S bumper and the vents black?? or all silver???

cheers mate i do have a girlfriend lol this wekend i have been very busy and nd if photobucket would sort its self out i will be updating shortly ^__^

al let you know mate yeh man had 5 months to wait for my engine so been bust cleaning bits and gahering parts lol

330's new grill ^__^ cleaned up bottom rad hose

blitz BOV cleaning

some Livesports sideskirts i picked up new lower ball joints

B-pillar bars had ago at making some they come out alright Only had the pics from jays thread to work from Had to use 2 cans of orange When there dry will upload a pic fitted, UPDATE!

i swaped my rotas for some advan TC comps with egal F1s am going to get r888s and normal toyos on the rear

TOM'S grill making may have seen this on TGTT not yet finished but this is how it looks on a friends car, i am going to mold the bottom lip out, will add pics when av finished it

wil go for a ride dude ... lol

Brace Fitting! Polished it first

yeh man i will finish mine and then use mine as a template for another.

cheers gaz forged engines should be back this weekend :-]

the rad is only temp and i dint want it to look all normal lol cheers mate

lol had to man! there only 1 white 1 and thats going to look lovley with a TOM'S seat

Picked up another turbo timer from turbo dave And some heat range 7 plugs 2 TRD harnesses :] lucky find and message on ebay ^__^ need to give them a good clean up but soon be looking amazing my temp TDO4 kit the clean up! need to weld this back on :] bit of metal polish Civic rad and modded the stock starlet fan to it by cutting some of the metal housing away on the fan Time to clean this up Prime left over can of red Clean up the fan used abit of thinners blacked out the rad cleann up time oily as fuck may need to get a new 1 me thinks but i will try this 1 first new gaskets knock off the old rust clean the compressor housing up time SHINY masking up fuck it ...RED NEW clips Welded the downpipe time to pop abit of paint on the exhaust housing Time to paint the water lines dint come out to bad dry yay refit the lines making new rad brackets i work for the nhs so there always chucking out stuff so i always go hunting through it i know ma a right hobo found this from a hotlock (warm meal trolly) cuz its SS took ages to drill out i need to cut and bend this into a step up to fit on pics to come when i get round to it! ^__^ Get GUNKED can you tell what side i started doing???? how shes been sitting for over 5 months

Cleaned up the TRD harness Removed the fucked exhaust Tight! Y0 to make way for this bad beauty RS*S full system poilished Picked up a rear cusco brace picked up some nismo vents for the TOM'S bumper ^__^ gave the wiper arms abit quick lick of paint started work on the TOM'S bumper few pics of the hybrid i was going to use untill i got my other setup

this threads a lil late because i got her about a year ago now lol but i wanted to start right from the word GO!

This is my second EP82 This time round: 1995 Quadlamp Silver Pick her up from a member on hear with bottom end gone me and dale (padder143) towed it all the way back from kent to sheffield :| worth it.... YES What she came with: Rota RS8s .............NEW Yokohama parada spec 2s.............NEW Gab gas front & rear shocks and springs TRD front anti roll bar Cusco break stopper RX7 top mount HKS super BOV & top mount flange pipe Greddy Gearknob TRD short shifter Auto gauge: boost, water temp, oil temp Fucked DIY exhaust Decat Nardi boss and wheel Razo pedles TRD HT leads 5mm wheel spacers Red stuff pads allround First thing i did was change the nardi wheel to my momo 1 as the nardi wheel was FUCKED allt he leather had come away and was left with rubber band for a wheel, i also poped on my D2 handbreak button ^__^ i had to keep my old buckets from the first EP so the second thing i did was to get them fitted ^__^ Then gutted the rear Removed the GABs to give them a clean up and good check over pulled off the RX7 top mount to sell Started to pick a few bits up cheap carbon look gauge pod For my battery Relocation so when i stoped buying bits i decided it was time to start work on her pulled engine out and now she is being forged ^__^ so this is what i have been up to while engine has been out .....