sacodetoro

Bump, I have money and I know their worth. 

If it's forged it must be running 250+, I don't want to go down the road of doing work. 

My number is 07837923660 should anyone come across someone flirting with selling, even if you are reading this years from now call the number lol. 

After spending ten fortunes, having my heart broken and 4 years away, I want to return to my roots.

Looking for a preferably black EP82, forged, and if possible TOMS kitted, I don't ask for much....

What have you?

Rich

I'll be vacating all sites

Seeing it again would be like looking at pictures of your ex girlfriend shagging someone else.

If it blasts past me at 120 it'll be even worse lol

Lol

Year:1994
Model:ep82
Tax:none
MOT:none
For sale: TOMS Forged TD04 Quadlight EP82 GT Turbo

Item Condition: See description

Price and price conditions: £1700

Extra Info:

I've owned this car for the last 5 years, I had it imported from Japan by a friend of mine and it was a long 3 months waiting for it to arrive!

Jay and Chris Carson have both worked on the car along the years so speak to them if you like re the below.

Car came fairly standard and then I went about changing that, resulting in the following modifications:

Engine & Drivetrain
The Engine was forged about 15,000 miles ago, parts were bought from Toyota and Momentum Motorsport, the engine was built by Alan Jackson of McBriar's Toyota in Killinchy, Alan has built countless race engines and also done a lot of Rally work and will happily talk to anyone regarding the engine. Block work was carried out by Comisky Engineering. Car is making 260HP.

Since the above I drove through a puddle just below a foot deep, water splashed up into the air filter and the engine cut out. Tried to turn it over once and it wouldn't start so it got put on a trailer and stored in my mates shed since. The result being that there is a possibility a rod got bent, having said that there is also the possibility it just needs drained of oil and new plugs etc. I don't have the knowledge or the time or the will to spend any more cash (of which I've spent a lot) on it, if I fixed it I'd just be selling it anyway hence the price. A long list of parts, have a breaking value far in excess of the price I am looking.

JE 13.5cc 74.5mm dished forged pistons
Scat forged rods
TRD 0.6mm Head Gasket
ARP uprated headbolts
Genuine Toyota Full Gasket Kit
Genuine Toyota Oil Pump Kit
OEM Water Pump Kit
OEM Cambelt Kit inc Idler & Tensioner
ACL Main Bearing Kit
ACL Big End Bearing Kit
ACL Thrust Washer Kit
460cc injectors with all new seals
WEPR Front Mount Intercooler
WEPR mild steel externally gated evolution manifold
WEPR stainless steel screamer pip
WEPR stainless steel decat
WEPR stainless lines
TIAL 38mm wastegate with 1bar spring
TD04 Turbo
Stainless exhaust, I think it's APEXI
Low temperature thermostat
Blue Magnecore HT leads
New heat range 7 NGK spark plugs
New Toyota dizzy cap and rotor arm
New Toyota PCV
GReddy oil filler cap
HKS dump valve
SPEC 6 PUK Paddle Clutch & New Flywheel

Chassis
TRD front anti roll bar
Whiteline adjustable rear anti roll bar
KYB Special SR Shocks and Espilir 40mm springs (moved from coilovers far better in the real world)

Wheels and Brakes
15" Racing Hart CP035 alloys (could do with a refurb)
Yokohoma parada spec2 tyres with good tread
WMS four pot calipers
EBC Pads
Stainless steel braided brake lines
New rear discs and pads last year for the MOT
DOT 5.1 Fluid

Interior & Electronics
Apexi AVCR Electronic Boost Controller
GReddy Emanage Ultimate with 3Bar map sensor and FIELD extension harness
60mm Apexi EL boost gauge
Laser pro park speed gun jammer
JVC Stereo/Amp/6x9s and front speakers
Doorcards retrimmed in alcantara
Red Recaro Speed seats
ZEP seat rails
Recaro rear bench
Optional extra boot mat

Exterior
Note the TOMS bumper is off the car due to it getting broken on the recovery lorry
TOMS sideskirts
Livesports rear lip
Wind deflectors
Rear windows light smoke tint

Pictures:



Contact Details:
Mobile : 07837923660
Email : richard2bullock@gmail.com

Location:
Northern Ireland - Car is located in comber and can be viewed 9am - 8pm Mon-Fri and 9am-6pm on a saturday

Delivery & Conditions of Delivery: Can be shipped anywhere in the UK if you like or collected.: 75k

Import?

Northern Ireland is part of the United Kingdom.

The Queen is the head of state and David Cameron decides where my car tax gets spent....

I've been ridiculously busy, I'll get back to everyone on Wednesday when I'm off work.

Thanks,

Richard

This is gorgeous!!

All the best with the new home mate, shame to see this go I bet!

Just a thought, maybe an engine bay picture will help the sale?

Matt.

Cheers man good thinking, I'll fire one up later.

3 Bed house just opposite Stormont, good garden for the wee man too, hopefully be in in a few weeks.

Thanks guys, that horrible moment when you buy a house and all your automotive fun has to go

Dd

As above, preferably in NI

Cheers,

Rich
07837923660

Had it looked at by Chris Carson and also sent the map to the guy who built the engine (moved to canada before I could get it in) and it turns out a lot of timing has been pulled at the top end that there was no need for, so going back to Chris when we get a dry night to get it sorted.

If I got that for £200 I would have felt like I won the lottery lol

www.craigsplates.com

They do them, I have got one before, legal font material etc

Na the dyno reads fine compared to others in NI, I'm not getting the boat to england lol

Was on the way home from being mapped and called in at the dyno on the off chance, assumed it was fueling fine and just wanted a figure to give me good weekend lol, never considered i would need to find out why they figure was low, heinsight and all that.

Didn't seem to be, but on the same rollers a few years before it did the same thing on a different engine and map.

Ye it's forged

Unfotunatley no afr graph never thought to ask them to put the sensor on.

Emanage Ultimate

Johnny at AI autosport, I think he may have played it a bit safe

Got the car dynoed on Friday and made the below power at 1.5 bar, pretty disappointed was hoping at 1.5bar would be 270 plus. Mapped on 95 ron, what are people's thoughts?

Bump

I think I already have the standard ones? I had TOMS ones on and they have since been removed so wanting something to replace them for a while

Looking a set of sideskirts for an ep82 in black, don't have to be mint, what have you?

Rich

For the third time in this thread I think I'll chance my arm that someone might actually post up what the option is?

Or is my post count not high enough to merit a responce?

Sold