nordonian

how much is the heat wrap stuff

ok Guys, Midday Saturday in belfast docks outside Harland and Wolf. How does that sound

i removed mine last weekend to give it a clean and a paint, forgot to put it back on and when i stopped the steam was flying outta the radiator and the heat under bonnet was a lot worse than normal. I really would have thought it would be an essential part of the engine.

if we cant get anything sorted for crismast what about a new year meet this side of the newyear.

i dont care as long as im sitting in my local for 3pm lol

I was down at this car park tonite to check it out for bumps for all you low runners, unfortunatly they have put a sign up to say Private car park. Its not gonna be able to happen here unfortunatly, an alternative location will have to be found elsewhere by someone else.

rite guys, organise this for about 12. Ill be dissapearing about 230 to the pub for 4 hours of constant football. Man united play at 3, followed by chelsea at 5 30.

any time suits me DIRECTIONS If coming off motor way, follow all directions for Craigavon Area Hospital. at the hospital take left and head for lurgan, At the first roundabout after craigavon hospital take left and head down past kernan playing fields, then take left and into the cemetary car park If anyone needs any further directions then just let me know.

The car park in portadown for this is at a cemetary car park which is also used for kernan playing fields, We would need to keep it at the opposite end to the cemetary and keep noise to a minimum and seriously no dickinga bout.

get onto the m1 and head for dungannon. Take off onto the m12 and it brings you up to David prentice garage.

I think the valve stem seals are either gone or are on their way out. I found a gasket set on ebay which includes inlet & exhaust man gaskets,rocker gasket,stem seals,cam seal + others. if i remove the head of the engine would i need to replace the head bolts, or would the current bolts still do ok.

well portadown is almost dead centre between newry and belfast. Takes me half an hour to get to each from my house.

unfortunatly guys i really cant c this working at the retaill park, Its going to be the last saturday before crimbo and absolutly everywhere will be heaving. There is a possible location we could hold a meet near me, Its well out of the way and is a good quiet spot so we would have no problems with parking etc. Its a carpark for a cemetary and local playing fields, howerver there is a house at the end of the car park with a cctv camera outside, and since it is literally a stones throw from my house i would only want sensible people there who would not be arsing about handbraking or spinning wheels etc, Any dicking about and you will have me to answer to. unforunatly there is no mcdonalds near it but there is a chippy, chinese and a spar within walking distance.

ill be changing the air intake mani hopefully in the next few days, but i havent a clue where to even start. Anyone able to post a step by step guide please.

Exactly what size is the 4efe leads 7mm 7.5mm or 8?

lookin good buddy, definatly improving

Can anyone tell me if a rear roll cage from a 106/saxo would fit an ep91 starlet. One has popped up for sale on a local cruising site, and i definatly think it looks the dogs danglies

Can anyone help me find somewhere that sells these valve caps. Im lookin the set that has the screw on the side, otherwise they will be stolen in a matter of days.

the rolla is an absolute animal of a car, ive seen it at meets before where hes been putting the back end out. That thing doesnt go round, it literally sling shots the back end of the car round and all you hear is the whine of the supercharger doing its thing

few snaps on another site, just picked out some of the cream of the crop... http://www.jon44w.com/site3/viewthread.php?tid=2043 full report if anyone wants to view all the pictures.

Im pretty sure my woman was away for two and half hours, was good to get a chin wag with out the usual "im cold", "Im bored", "Can we please go"

glad to see that it was shown in the pics the 4 hours i spent cleaning the starlet this morning. An excellent day out with some seriously high spec cars including no less that 6 different skylines.

Im a plasterer Only just out of my apprenticeship and as yet havent been able to find any squads to get in with, so im still with the same contractor but im definatly not on the normal plasterers wage.

just went onto THEAA.com From: Cork To: Antrim Distance: 283.2 miles Time: 4 hr 56 min Ill definatly be at this meet, havent missed a jap-heaven meet yet, always an outstanding turnout

my local toyota dealership is being thick when it comes to finding part numbers again can someone please tell me the part number for the plastic plugs, and plastic screws for the internal boot panel. Its for the panel that needs removed in order to get at the number plate lights and rear wiper motor. I think there is about 8 screws